Navegando por Autor "Andrade, Ednilton T. de"

Agora exibindo 1 - 4 de 4

Mathematical modelling and immediate and latent quality of natural immature coffee under different drying conditions
(Associação Brasileira de Engenharia Agrícola, 2019) Andrade, Ednilton T. de; Lemos, Isabella A.; Dias, Camila de A.; Rios, Paula de A.; Borém, Flávio M.
This work aimed to study the immediate and latent effects of different relative humidities on the quality of dried coffee fruits, describe the drying kinetics of natural immature coffee (Coffea arabica L.), and evaluate the mathematical model that best fits the experimental drying data. The drying was carried out in a fixed layer dryer coupled to a composite air conditioning system in which the drying air was controlled with an air flow of 20 m3.min1.m-2, at a temperature of 40 °C, and at relative humidities of 10%, 17.5% and 32.5%. Manually harvested coffee fruits were used and dried to a mean water content of 0.120 dry basis (d.b). After drying, the kinetic curve and the physical and physiological properties were determined. The coffee was stored in permeable packs for 6 months. The electrical conductivity, potassium leaching, and colour analysis were performed every 2 months. For the modelling adjustment, the models were tested, and the Midilli model had the best fit with the drying kinetics of the immature coffee. No immediate damage was observed in the physical and physiological quality of the coffees, and latent damage was perceived after 120 days of storage for the natural immature coffees.
Modeling of operational performance parameters applied in mechanized harvest of coffee
(Departamento de Engenharia Agrícola - UFCG, 2016-10) Cunha, João P. B.; Silva, Fabio M. da; Andrade, Ednilton T. de; Carvalho, Luis C. C.
In super-mechanized coffee harvesting system, all operations are performed mechanically. In order to improve the logistics of mechanized agricultural operations, the knowledge on the variables that affect the operational performance can generate models to accurately estimate these parameters. The use of response surface methodology (RSM) allows to verify the influence of different independent variables and the generated response to allow for a great value. This study aimed to verify, using RSM, the influence of speed, mean length of rows and the slope of the areas on the operational performance parameters in different mechanized operations in coffee production, such as: harvest, sweeping and gathering. The results show that the slope directly influences the operational performance of the mechanical harvesting of coffee. The RSM proved to be an important tool to verify the effect of variables on performance parameters, and the generated models showed high significance.
Sorption isotherms and isosteric heat of pericarp and endosperm tissues of arabica coffee fruit
(Associação Brasileira de Engenharia Agrícola, 2020) Dias, Camila de A.; Andrade, Ednilton T. de; Lemos, Isabella A.; Borém, Flávio M.; Barros, Ezequiel A.
The aim of this study was to evaluate and model the hygroscopic equilibrium and isosteric heat curves of pericarp and endosperm tissues of arabica (Coffea arabica) coffee fruit, in different temperature and relative humidity conditions. Sorption isotherms were drawn under temperatures from 20°C to 70°C and relative humidity ranging between 10% and 90% until the product reached the equilibrium water content with the environment. The experiment was set up in a 4 × 4 factorial scheme (four relative humidity of the drying air and three tissues of the coffee cherry pericarp + endosperm [1: exocarp + part of the mesocarp, 2: mesocarp, 3: endocarp, 4: endosperm]), in a completely randomized design, with three repetitions. The results were examined by analysis of variance and regression using the STATISTICA 5.0 statistical software. Among the analyzed models, the ones that best fit the experimental data were modified GAB, for exocarp + part of mesocarp and mesocarp, modified Henderson, for endocarp, and Sabbab for endosperm. It was observed that, for all treatments, the lower water contents required a higher amount of energy to reach the equilibrium water content, and the integral isosteric heat decreased with the increasing equilibrium water content.
Structural static and modal frequency simulations in a coffee harvester’s chassis
(Departamento de Engenharia Agrícola - UFCG, 2018-07) Silva, Evandro P. da; Silva, Fábio M. da; Andrade, Ednilton T. de; Magalhães, Ricardo R.
Coffee harvesters are subject to stresses and vibrations in their structure, originating from engines and harvesting system. These structures must be designed to avoid rupturing of the components due to fragility of the materials, inadequate geometries, or the phenomenon of resonance, which increases the displacements/deformations of the components. In this scenario, the main objective of this study is to analyse the results of stresses and displacements from two static simulations and to present results of natural vibration frequencies from two modal simulations in a self-propelled coffee harvester. For this purpose, 20 modal shapes were generated, considering coffee harvester reservoir as empty and full. The simulations were carried out using the finite element method in which actual boundary conditions were applied to the motor chassis of the harvester. As results, stresses above the material’s yield strength were observed in some regions of the components. Greater displacements were observed at the rear of the chassis, suggesting a new positioning of the rear wheel to obtain a uniform load distribution. Some natural frequencies, which presented greater displacements/deformations, can be affected by the operation of the main motor, also associated with the vibrating system in the coffee harvest, which may cause rupture of components.