Química Nova
URI permanente para esta coleçãohttps://thoth.dti.ufv.br/handle/123456789/13323
Navegar
7 resultados
Resultados da Pesquisa
Item Café com quimioterapia: uma aplicação do planejamento fatorial fracionário 2|5-1(Sociedade Brasileira de Química, 2023-03-03) Silva, Kaique Carvalho da; Caldeira, Gabriel Rocha Figueira; Nogueira, Kenya Gomes; Canela, Maria Cristina; Filgueiras, Paulo Roberto; Souza, Murilo de OliveiraChemometrics is a subfield of chemistry that emerged from advances in analytical instrumentation and computing. When seeking to solve chemical problems that depend on many concomitants experimental variables, chemometrics can be employed in order to extract as much information as possible in the least possible number of experiments. In addition, it is possible to evaluate the important effects and interactions among the variables to understand the processes being monitored in each system. In this sense, this article aimed to develop a didactic experiment of caffeine extraction using an espresso machine, applying the 25-1 fractional factorial design. The variables studied were temperature (75 and 78 °C), pressure (2 and 15 bar), granulation (bean and ground), type of coffee (special and traditional) and period of the day (morning and afternoon) to obtain maximum extraction of caffeine. The coffee extracts obtained were analyzed using UV-Vis molecular absorption spectrophotometry. The developed experiment showed the potential to spread the application of chemometrics in the academic environment and to facilitate the teaching of fractional factorial design.Item Experimento com abacate, borra de café, licuri e leite de coco para extração de óleo, produção de biodiesel e análise espectral(Sociedade Brasileira de Química, 2018) Cunha, Silvio; Rodrigues, Marina Costa; Mattos, Rosiene Reis; Teixeira, Leonardo Sena Gomes; Santos, Airam Oliveira; Santos, Elaine V.; Souza, Rauan S.; Andrade, Givaldo dos Santos; Paula, Rodrigo De; Jesus, Djane S. deAn undergraduate organic chemistry experiment for oil extraction and biodiesel production using alternative biomass was developed, whereby oils of avocado, coconut and spent coffee grounds were obtained and submitted to transesterification reaction with CH3OH under NaOH catalysis. Avocado and coffee oils were obtained by typical extraction and coconut oil was obtained through water evaporation of coconut milk in a domestic microwave oven. The commercial oil of licuri (Syagrus coronate), a Brazilian native biomass, was also converted to biodiesel. All four oils and four biodiesels were characterized by 1H-NMR and FTIR, and a comparative study of these spectra reveled that FTIR analyses alone provides enough information to discriminate between oil and biodiesel and confirm transesterification reaction. Besides, the unsaturation degree of all oils was determined by 1H-NMR. A mechanistic proposal concerning the role of NaOH catalysis is presented, excluding the sodium methoxide formation.Item Kinetic parameters study for the slow pyrolysis of coffee residues based on thermogravimetric analysis(Sociedade Brasileira de Química, 2020) Tibola, Fernando L.; Oliveira, Tiago J. P. de; Cerqueira, Daniel A.; Ataíde, Carlos H.; Cardoso, Cássia R.Thermal decomposition of coffee husks was investigated by thermogravimetric analyses. The proximate, ultimate and composition analyses were performed. Thermogravimetric tests were realized, the material was heated to 1173 K using five heating rates: 5, 10, 15, 20, 25 K min-1. The kinetic parameters were estimated using the methods of Kissinger-Akahira-Sunose and Friedman, the distributed activation energy model and the independent parallel reactions model. The isoconversional models of Kissinger-Akahira-Sunose and Friedman showed the dependence between determined values of activation energy and mass conversion, the activation energy values varied from 1437.39 to 199.22 kJ mol-1 for Kissinger-Akahira-Sunose and from 127.81 to 230.35 kJ mol-1 for Friedman model. The values of activation energy were determined for Miura-Maki method; varying from 137.39 to 199.22 kJ mol-1. The model of parallel and independent reactions showed the presence of six different reactions (with activation energy values varying from 42.0 to 214.2 kJ mol-1) occurring during coffee husks pyrolysis, indicating a complex reaction. Currently, works regarding the determination of kinetic parameters for coffee husks pyrolysis are not common. The present work is the first report using the model of parallel and independent reactions to estimate kinetic parameters for pyrolysis of coffee husks, a residue widely generated worldwide.Item Produção e caracterização de carvão ativado produzido a partir do defeito preto, verde, ardido (PVA) do café(Sociedade Brasileira de Química, 2009) Ramos, Paulize H.; Guerreiro, Mário C.; Resende, Eliane C. de; Gonçalves, MaraísaThe black, green and sour coffee defect (PVA) contributes with 20% of the total coffee production. It should be separate from the normal coffee grains in order to improve the final quality of the beverage. In this way, the present work has the objective to use the PVA reject for the production of activated carbon. The activated carbon (CA) was prepared from PVA defect using zinc chloride as activating agent. The prepared material (CA PVA) was characterized and the adsorption tests were carried out using as organic models methylene blue (AM) and reactive red (VR). The CA PVA revealed to be more efficient in the removal of the organic contaminants compared to a commercial activated carbon.Item Materiais à base de óxido de ferro para oxidação de compostos presentes no efluente da despolpa do café(Sociedade Brasileira de Química, 2008) Gonçalves, Maraísa; Guerreiro, Mário César; Oliveira, Luiz Carlos Alves; Rocha, Cristian Luciana daMaterials based on pure iron oxide and impregnated with niobia (Nb2O5) were prepared. Their catalytic activities were tested on the oxidation of compounds present in the wastewater from the processing of coffee berries. Particularly caffeine and catechol were tested. The oxidation reactions were carried out with the following systems (i) UV/H2O2, (ii) photo-Fenton and (iii) heterogeneous Fenton. All materials were characterized with X-ray diffraction, Mössbauer and infrared spectroscopy. Iron was mainly in the forms of goethite and maghemite. The oxidation kinetics were monitored by UV-vis and the oxidation products were monitored by mass spectrometry. The photo-Fenton reaction presented highest oxidation efficiency, removing 98% of all caffeine and catechol contents.Item Preparação de carvão ativado em baixas temperaturas de carbonização a partir de rejeitos de café: utilização de FeCl3 como agente ativante(Sociedade Brasileira de Química, 2008) Pereira, Elaine; Oliveira, Luiz C. A.; Vallone, Andréa; Sapag, Karim; Pereira, MárcioFerric chloride as a new activating agent was used to obtain activated carbons from agroindustrial waste. This material was prepared at three temperatures of pyrolysis, 200, 280 and 400 ºC. The carbonaceous materials obtained after the activation processes showed high specific surface areas (BET), with values higher than 900 m² g-1. The materials showed different behaviors in the adsorption of methylene blue dye and reactive red textile dye in water solutions. An important fact in the use of FeCl3 as an activating agent is that the activation temperature is at 280 ºC, well below of those commonly employed in chemical or physical activations described in the literature.Item Preparação e caracterização de carvão ativado produzido a partir de resíduos do beneficiamento do café(Sociedade Brasileira de Química, 2008) Brum, Sarah Silva; Bianchi, Maria Lucia; Silva, Vanésia Liane da; Gonçalves, Maraísa; Guerreiro, Mário César; Oliveira, Luiz Carlos Alves deCoffee fruit processing is one of the most polluting activities in agriculture due to the large amount of waste generated in the process. In this work, coffee parchment was employed as precursor for the production of carbons activated with ZnCl2 (CAP). The material was characterized using N2 adsorption/desorption at 77 K, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The material showed a surface area of 521.6 m²g-1 and microporous structure. CAP was applied as adsorbent for the removal of methylene blue dye in aqueous medium. The adsorption capacity was found to be about 188.7 mg g-1.