Brazilian Journal of Chemical Engineering
URI permanente para esta coleçãohttps://thoth.dti.ufv.br/handle/123456789/13554
Navegar
2 resultados
Resultados da Pesquisa
Item Extraction of caffeine, chlorogenic acids and lipids from green coffee beans using supercritical carbon dioxide and co-solvents(Brazilian Society of Chemical Engineering, 2008-09-02) Azevedo, A. B. A.; Mazzafera, Paulo; Mohamed, R. S.; Melo, S. A. B. Vieira de; Kieckbusch, T. G.The paper reports on experimental data on the extraction of caffeine, coffee oil and chlorogenic acids from green coffee beans using pure supercritical CO2 and supercritical CO2 modified with ethanol (5% w/w) and isopropyl alcohol (5% w/w) at 50 and 60ºC and 15.2 24.8 e 35.2 MPa. In this study extraction kinetics were obtained for all assays i.e. samples were collected at several time intervals for each solvent and mixed solvent. When pure CO2 and CO2-ethanol mixed solvent were used, an increase in pressure resulted in an increase in the amount of oil extracted. When CO2 was modified with isopropyl alcohol, the amount of coffee oil extracted also increased with pressure. Caffeine extraction initially increased and subsequently decreased with pressure. Chlorogenic acids were only extracted when isopropyl alcohol was used as a co-solvent. An increase in extraction temperature resulted in a decrease of caffeine and oil extraction (retrograde condensation) when only CO2 was used as solvent. With the use of co-solvent this retrograde behavior was no longer observed and the increase in temperature resulted in the increase in the extracted amounts of caffeine, coffee oil and chlorogenic acids.Item Improvement of soluble coffee aroma using an integrated process of supercritical CO2 extraction with selective removal of the pungent volatiles by adsorption on activates carbon(Brazilian Society of Chemical Engineering, 2006-01-18) Lucas, S.; Cocero, M. J.In this paper a two-step integrated process consisting of CO2 supercritical extraction of volatile coffee compounds (the most valuable) from roasted and milled coffee, and a subsequent step of selective removal of pungent volatiles by adsorption on activated carbon is presented. Some experiments were carried out with key compounds from roasted coffee aroma in order to study the adsorption step: ethyl acetate as a desirable compound and furfural as a pungent component. Operational parameters such as adsorption pressure and temperature and CO2 flowrate were optimized. Experiments were conducted at adsorption pressures of 12-17 MPa, adsorption temperatures of 35-50ºC and a solvent flow rate of 3-5 kg/h. In all cases, the solute concentration and the activated particle size were kept constant. Results show that low pressures (12 MPa), low temperatures (35ºC) and low CO2 flowrates (3 kg/h) are suitable for removing the undesirable pungent and smell components (e.g. furfural) and retaining the desirable aroma compounds (e.g. ethyl acetate). The later operation with real roasted coffee has corroborated the previous results obtained with the key compounds.