Coffee Science_v.16, 2021

URI permanente para esta coleçãohttps://thoth.dti.ufv.br/handle/123456789/12727

Navegar

Resultados da Pesquisa

Agora exibindo 1 - 7 de 7
  • Imagem de Miniatura
    Item
    Tasters’ performance in a coffee quality contest in Brazil
    (Editora UFLA, 2021) Pinheiro, Aracy Camilla Tardin; Fabri Júnior, Marcos Antônio; Cruz, Cosme Damião; Rufino, José Luis dos Santos; Sakiyama, Ney Sussumu
    The objective of this work was to evaluate the performance of coffee tasters in five annual editions of Minas Gerais Coffee Quality Contest. The repeat ability coefficients of the tasters’ scores for sensory attributes were estimated, as well as the minimum numbers of tasters required for consistent sensory results, and the groups of tasters by (dis)similarity of sensory scores. For the repeatability analysis, the treatments (coffees) were tested with the repeti tions, constituted by the tasters. The repeatability coefficients were estimated using the analysis of variance, principal component and structural analysis methods. The minimum number of tasters was obtained based on pre-established determination coefficients. Euclidean distance matrices between tasters were determined, which were used as a measure of dissimilarity for cluster analysis by the Tocher optimization method. The tasters’ performance in five annual editions of Minas Gerais Coffee Quality Contest is reliable using COE or SCA sensory analysis protocols. Although not fully calibrated, most tasters are grouped with similar cupping results. Unless efficient calibration prior to the contest is adopted, the number of tasters to be used in the next contest editions can not be drastically and randomly reduced, since the estimated minimum number varied over the years. Calibration activities are sug gested to improve two main aspects of the Minas Gerais Coffee Quality Contest: distinguishing the best coffees and trainning tasters.
  • Imagem de Miniatura
    Item
    Sensory Assessment of Gayo arabica coffee taste based on various varieties and manual brewing devices
    (Editora UFLA, 2021) Fadhil, Rahmat; Nurba, Diswandi; Sukmawati, Elya
    Arabica coffee (Coffea arabica) becomes one of the most in-demand types by the community due to its typical taste. The material needed in this study was Gayo Arabica coffee (full wash) obtained from farmers in Bener Meriah, Aceh Province of Indonesia and specially ordered. The right method and coffee brewing device are needed to obtain this typical taste of coffee. One of the coffee brewing methods that keeps developing until now is the manual brewing method. This study aims to find the sensory assessment of Gayo Arabica coffee taste in various varieties with manual brewing devices by using Analytical Hierarchy Process (AHP) method. Manual brewing devices used were Vietnam Drip, French Press, V60, Eva Solo, and Filter, while the chosen va rieties are Tim-tim (Gayo 1), Bor-bor (Gayo 2), and P88. The study result showed that based on the preference of product acceptance by the panelists, the most chosen criteria of taste sensory were flavor (0.253), followed by aftertaste (0.222), sweetness (0204), acidity (0.165), and body (0.155). The variety chosen as the best variety with manual brewing was Tim-tim in various manual brewing devices, which are V60 (0.156), French Press (0146), and Eva Solo (0.140). The next alternatives brewing devices were Vietnam Drip (0.127) and Filter (0.109). Thus, it could be concluded that flavor is the top priority that influences Gayo Arabica coffee’s taste. Therefore, Tim-tim with manual brewing devices (V60, French Press, and Eva Solo) is preferred over other varieties in this study. This finding also becomes a recommendation that the variety for the best serving of Gayo Arabica coffee brew with the most preferred taste with manual brewing devices is Tim-tim.
  • Imagem de Miniatura
    Item
    Cold coffee beverages extracted by cold and hot methods: composition and sensory acceptance by youngers
    (Editora UFLA, 2021) Violin, João Leonardo; Acre, Lucas Bonfanti; Francisco, Julyene Silva; Mori, André Luiz Buzzo; Benassi, Marta de Toledo
    Brazil is the second largest coffee consumer in the world, however, the participation of the young public in this market is not very expressive. The objective of this study was to evaluate the impact of non-sensory (packaging color, information, and images) and brewing methods (hot or cold extraction) on the acceptance of cold coffee beverages by young consumers. A coffee:water ratio of 1:10 (w:v) and infusion during 4 min and 24 h was used for both hot and cold extractions, respectively. Hot extraction was performed at 95 °C, then cooled in a refrigerator and served at 6 to 10 °C, the same temperature that the cold extraction was performed and served. The beverages were characterized by composition and extraction yield. The packaging of the beverages was designed aiming to appeal to the young Brazilian public (15 to 24 years old), and it was used for the Expectation Evaluation. The type of extraction (hot or cold) produced beverages with differences in composition but with similar acceptance. Except for pH (average value of 5.1), the beverages differed in all the studied parameters. Hot-extracted beverages (iced coffees) had higher contents of caffeine, chlorogenic acids, and melanoidins (92.9, 258.2, and 360.8∙10-6 kg 100 mL-1, respectively); they also presented higher acidity (3.4 mL of NaOH 20 mL-1) as well as higher yield compared to the cold-extracted beverages (cold brews). The use on product labels of brown and black colors, coffee bean images, and the inclusion of information regarding the bever ages (extraction method, consumption temperature, non-addition of sugar) generated a positive expectation that was assimilated by the young public. In conclusion, both proposals of cold coffee beverages (by hot or cold extraction) were well accepted considering their sensory and non-sensory aspects.
  • Imagem de Miniatura
    Item
    Effect of roast degree, preparation method, and variety in the sensory and chemical characteristics of coffee (coffea arabica): a mid-infrared spectrum analysis
    (Editora UFLA, 2021) Barrios-Rodríguez, Yeison Fernando; Córdoba, Gisela-Andrea; Bahamón-Monje, Andrés Felipe; Gutiérrez-Guzmán, Nelson
    In coffee beverages, there are several factors that affect the final compounds and generate sensory variations. This study evaluated the effect of five preparation methods, three roast degrees, and three different varieties (coffea arabica) on the physicochemical compounds of coffee (coffea arabica) be fore and after preparation by using information obtained from the mid-infrared spectrum. The effect on some sensory attributes was assessed by means of a panel of 54 habitual coffee consumers. Spectrum data were processed using hierarchical clustering and principal component analysis (PCA), while a mixed general linear model was applied for sensory analysis. The results showed that each factor behaves independently, showing a significant effect (p < 0.05) on a greater number of attributes. The preparation method and the roast degree are attributed to the changes generated in the chemical character istics of coffee during these processes. Through the analysis of the infrared spectrum (IR) by hierarchical cluster, it was found that, before the preparation of the coffee drinks, the samples are grouped by roast degree, regardless of the type of variety. Spectrum analysis by PCA after brewing indicated that there is a greater effect of the roast degree and variety of coffee (coffea arabica) on the chemical markers of the IR spectra. Finally, wavelengths 1,800, 1,740, 1,650, 1,550, 1,480, 1,150, and 710 cm-1, which had a greater contribution in the PCA and allowed the evaluated samples to be grouped differently, are those related to non-volatile compounds such as caffeine, chlorogenic acids, and trigonelline, which provide sensory characteristics to the final drink.
  • Imagem de Miniatura
    Item
    Sensory analysis and mid-infrared spectroscopy for discriminating roasted specialty coffees
    (Editora UFLA, 2021) Debona, Danieli Grancieri; Oliveira, Emanuele Catarina da Silva; Caten, Carla Schwengber ten; Guarçoni, Rogério Carvalho; Moreira, Taís Rizzo; Pereira, Lucas Louzada; Moreli, Aldemar Polonini
    In general, the process of roasting coffee uses a rotated fix drum or fluidized bed. Theoretically, the fluidized bed can provide more homogenous roastings throughout the process. Thus, in this study, we analyzed the sensorial and chemical attributes for two different coffees submitted to three roasting profiles using fluidized bed roaster. The coffees were roasted for a high temperature for a short time (HTST), medium temperature for a medium time (MTMT), and low temperature for a long time (LTLT). Sensory analysis was performed on the roasted coffees according to the SCA methodology and chemical analy sis through mid-infrared spectroscopy. The results of sensory analysis indicated a preference for MTMT roasting for coffee grown at high altitude and HTST roasting for coffee grown at low altitude. Chemically, coffees show that LTLT and MTMT roasts are most distant from each other in their chemical com position when roasting low altitude coffee, whereas the HTST and MTMT roasts are the most distant from each other when roasting high altitude coffee.
  • Imagem de Miniatura
    Item
    Factors related to coffee quality, based on the “Cup of Excellence” contest in Mexico
    (Editora UFLA, 2021) Gumecindo-Alejo, Ana Laura; Sánchez-Landero, Luz Amelia; Ortiz-Ceballos, Gustavo Celestino; Cerdán-Cabrera, Carlos Roberto; Alvarado-Castillo, Gerardo
    Coffee farming in Mexico is an activity of great economic, social, cultural, and environmental importance. One of the strategies for obtaining better prices is so-called “specialty coffees”, whose quality is evaluated through the “cup of excellence” contest. The aim of this work was to identify if there are factors related to the quality of coffee, based on the data provided by this contest. Information was obtained for the period 2012 to 2019 (since the event was suspended in 2020), but given the heterogeneity in the data, exclusion, and inclusion criteria were applied, examining only the years 2017 to 2019. Descriptive analyses show that, in Mexico, the coffee producing states of Veracruz and Chiapas predominate the highest scores, possibly because they are regions with the highest presence of biodiversity, which favors the quality of the coffee. A simple linear regression model also noted that quantitative variables (altitude, temperature, and precipitation) do not affect cup quality. Finally, a square chi analysis showed that the factors that affect the score are the process and mixing of varieties, which establish differences in the sensory characteristics of coffee, observing dependence between the two. It is concluded that the latter influence the score, where the washing process is best suited for coffees with an extraordinary quality profile, as well as the use of one or three varieties (particularly Arabica type) and that environmental and site components do not have a decisive effect on coffee cup quality.
  • Imagem de Miniatura
    Item
    Functional diversity of microbial communities associated with fermentation processes in coffee (Coffea arabica L.)
    (Editora UFLA, 2021) Peñuela-Martínez, Aida Esther; Romero-Tabarez, Magally; Zapata-Zapata, Arley David
    Mucilage fermentation conducted to degrade and remove coffee mucilage, is an important stage to also define coffee quality, but each microorganism’s contribution to the final quality is not yet known. Therefore, tools are needed to easily identify this relationship in order to be used to enhance coffee quality. The present manuscript describes the behavior of the microbial communities present in fermentations conducted under various conditions, which produced differences in the sensory quality of the coffee as assessed by the community-level catabolic profile approach. The coffee samples came from six different fermentation processes that produced coffee in two quality classifications according to the Specialty Coffee Association (SCA) protocol: very good and excellent. Functional diversity of the microbial communities and substrate consumption were compared through analysis of variance. The multidimensional scaling analysis was used to identify the similarities or differences between treatments. The indices of functional diversity revealed significant differences and direct proportionality with the quality rating. Diversity index (H) was between 2.09 and 2.71 and Evenness was between 1.75 and 2.21. The consumption of groups of substrates was different between fermentations, especially in carbohydrates and carboxylic acids, and the greatest consumption of these was found in the excellent-quality coffee. The different fermentative processes evaluated by this technique showed a high metabolic activity related to the great diversity of substrates given to the microbial communities and microorganisms involved, causing reactions that had influence on the final quality of the product.