Crop Breeding and Applied Biotechnology

URI permanente para esta coleçãohttps://thoth.dti.ufv.br/handle/123456789/12091

Navegar

Resultados da Pesquisa

Agora exibindo 1 - 10 de 13
  • Imagem de Miniatura
    Item
    Single-locus inheritance and partial linkage map of Coffea arabica L.
    (Crop Breeding and Applied Biotechnology, 2004) Sakiyama, Ney Sussumu; Teixeira-Cabral, Terezinha Aparecida; Zambolim, Laércio; Pereira, Antonio Alves; Schuster, Ivan
    In a backcross population of the allotetraploid Coffea arabica L. the loci with diploid-like segregation were predominant, although a few loci with tetrassomic inheritance or distortion of the expected segregation were also observed. A partial genetic map of Coffea arabica L. was constructed with 82 RAPD loci scored in this backcross population of 104 individuals. It covered the estimated length of 540.6 cM in eight linkage groups. The linkage group size was highly correlated with the number of markers, indicating random distribution of the markers in the groups. The average distance between two markers was 7.3 cM.
  • Imagem de Miniatura
    Item
    Repeatability and number of harvests required for selection in robusta coffee
    (Crop Breeding and Applied Biotechnology, 2004) Fonseca, Aymbiré Francisco Almeida da; Sediyama, Tocio; Cruz, Cosme Damião; Sakiyama, Ney Sussumu; Ferrão, Romário Gava; Ferrão, Maria Amélia Gava; Bragança, Scheilla Marina
    This study aimed to estimate the repeatability coefficient of the grain yield in Coffea canephora by three methods: to quantify the precision of the measurements; to predict the real value of an individual based on n evaluations; and to determine the number of phenotypic measures required in each plant to obtain an adequate precision level for an efficient discrimination of the genotypes. The coefficients of repeatability and determination were estimated based on four harvests of 80 genotypes. Highest estimates of the repeatability coefficient were obtained by the method of the principal components derived from the matrix of covariances, which expresses the correlation between each measurement pair. The prediction precision of the real individual value ranged from 65.32 to 81.59%, and remained practically unchanged from the sixth harvest on.
  • Imagem de Miniatura
    Item
    Reproducibility of the RAPD marker and its efficiency in coffee tree genotype grouping analysis
    (Crop Breeding and Applied Biotechnology, 2002) Sakiyama, Ney Sussumu; Teixeira-Cabral, Terezinha Aparecida; Zambolim, Laércio; Pereira, Antonio Alves; Barros, Everaldo Gonçalves; Sakiyama, Cássia Camargo Harger
    The genetic diversity of Coffea arabic L. cultivars is relatively narrow and its assessment and increase is important for breeding. Fifty two arbitrary primers were used to evaluate the reproducibility and the influence of the number of RAPD (Random Amplified Polymorphic DNA) markers on the estimation of genetic distances among 40 genotypes of Coffea spp. The average number of polymorphic bands was 6.69 per primer among all genotypes, and 1.27 among arabica coffee genotypes. RAPD markers were efficient in estimating the genetic distances among the genotypes. The increase in RAPD loci number during grouping analysis did not affect the major groups’ composition; however, it affected the composition of subgroups. Marker reproducibility was 76.88% and replicated data was recommended for distinguishing genotypes with the same genetic background.
  • Imagem de Miniatura
    Item
    Polymorphic information content of SSR markers for Coffea spp.
    (Crop Breeding and Applied Biotechnology, 2010) Caixeta, Eveline Teixera; Missio, Robson Fernando; Zambolim, Eunize Maciel; Zambolim, Laércio; Cruz, Cosme Damião; Sakiyama, Ney Sussumu
    Thirty-three coffee SSR primers from enriched genomic library with (GT)15 and (AGG)10 repeats were analyzed in 24 coffee tree accessions. Twenty-two primers were polymorphic among accessions; the number of alleles ranged from 2 to 13, with the mean number of 5.1 alleles per primer. PIC values ranged from 0.08 to 0.79. The highest mean PIC values were found for C. canephora (0.46), and the lowest values for C. arabica (0.22) and triploids (0.22) accessions. The polymorphic SSR markers used in this study were useful for genetic fingerprinting in the coffee tree, especially in the C. canephora and the leaf rust resistant arabica cultivars.
  • Imagem de Miniatura
    Item
    Grafted young coffee tree growth in a greenhouse
    (Crop Breeding and Applied Biotechnology, 2002) Sakiyama, Ney Sussumu; Tomaz, Marcelo Antonio; Martinez, Hermínia Emília Pietro; Pereira, Antonio Alves; Zambolim, Laércio; Cruz, Cosme Damião
    Grafted young coffee trees were observed in a greenhouse to study the effect of different scions and rootstocks on plant growth. Four Coffea arabica L. genotypes were used as scions: the cultivars Catuaí Vermelho IAC 15 and Oeiras MG 6851, and the progenies H 419-10-3-1-5 and H 514-5-5-3. They were also used as nongrafted control plants. Four genotypes were used as rootstocks: ‘Apoatã IAC 2258’ (C. canephora), ‘Conillon’ (C. canephora), ‘Emcapa 8141’ (C. canephora), and ‘Mundo Novo IAC 376-4’ (C. arabica). ‘Mundo Novo IAC 376-4’ and ‘Apoatã IAC 2258’ were classified as good rootstocks, while ‘Oeiras MG 6851’ and “H 419- 10-3-1-5” performed well as non-grafted plants. The diallel analysis statistical model was efficient to evaluate the general combination ability of the rootstocks and, therefore, recommended for rootstock selection procedures in breeding programs.
  • Imagem de Miniatura
    Item
    Comparison of nutritional efficiency among hydroponic grafted young coffee trees for N, P, and K
    (Crop Breeding and Applied Biotechnology, 2004) Tomaz, Marcelo Antonio; Sakiyama, Ney Sussumu; Martinez, Hermínia Emília Prieto; Cruz, Cosme Damião; Zambolim, Laércio; Pereira, Antonio Alves
    Grafted Coffea arabica L. plants were grown hydroponically in a greenhouse for an evaluation of their nutritional efficiency under the influence of different rootstocks. Four C. arabica genotypes were used as scions: ‘Catuaí Vermelho IAC 15’, ‘Oeiras MG 6851’, and lines H 419-10-3-1-5, and H 514-5-5-3. The three latter are cultivars resistant to the Hemileia vastatrix, pathogen of the orange rust. Rootstocks were three genotypes of Coffea canephora Pierre et Froenher: Apoatã LC 2258, Conilon, and Robustão Capixaba (Emcapa 8141), and one C. arabica genotype: Mundo Novo IAC 376-4. Rootstocks Apoatã LC 2258 and Mundo Novo IAC 376-4 were outstanding. Cultivars Conilon and Robustão Capixaba did not increase the nutritional efficiency of the scions. ‘Oeiras’ and H 419-10-3-1-5 had considerable nutrition efficiency when used as nongrafted plants.
  • Imagem de Miniatura
    Item
    Characterization of differential coffee tree hostsfor Hemileia vastatrix Berk. et Br. with RAPD markers
    (Crop Breeding and Applied Biotechnology, 2004-03-12) Teixeira-Cabral, Terezinha Aparecida; Sakiyama, Ney Sussumu; Zambolim, Laércio; Barros, Everaldo Gonçalves de; Silva, Dalza Gomes da
    Eighteen clones of differential coffee tree hosts for Hemileia vastatrix Berk. et Br. were characterized with RAPD markers. The genetic distances were estimated and the genealogical origin of the clones compared to data of markerbased clusters. Thirty-five primers identified 158 polymorphic loci of RAPD markers. The cluster based on the matrix of genetic dissimilarity values was compatible with information on the genealogical origin cited in literature. Specific markers for a number of clones were identified, and a combination of 12 RAPD markers allowed the characterization of the studied clones.
  • Imagem de Miniatura
    Item
    Discriminant analysis for the classification and clustering of robusta coffee genotypes
    (Crop Breeding and Applied Biotechnology, 2004-07-07) Fonseca, Aymbiré Francisco Almeida da; Sediyama, Tocio; Cruz, Cosme Damião; Sakiyama, Ney Sussumu; Ferrão, Romário Gava; Ferrão, Maria Amélia Gava; Bragança, Scheilla Marina
    This study evaluated the adequacy of the composition of three clonal Coffea canephora varieties recommended for the State of Espírito Santo by a multivariate method designated discriminant analysis. This method consists in the establishment of functions that enable the classification of a given individual into one, among various distinct populations, reducing the probability of a misclassification. It simultaneously considers measures of several traits, in order to give the new variety homogeneity. The original classification of genotypes in the three studied varieties, based on agronomical criteria, maintained expressive concordance with the results of the discriminant analysis, with an apparent deviation rate of only 6.25%. Corrected discriminant functions were also proposed, capable of classifying a new genotype into one of the three clonal varieties to be used in improvement programs, eliminating the subjectivity of the clustering process.
  • Imagem de Miniatura
    Item
    Partial map of Coffea arabica L. and recovery of the recurrent parent in backcross progenies
    (Crop Breeding and Applied Biotechnology, 2007-06-30) Oliveira, Antonio Carlos Baião de; Sakiyama, Ney Sussumu; Caixeta, Eveline Teixeira; Zambolim, Eunize Maciel; Rufino, Raphael José Nascif; Zambolim, Laércio
    A partial map of Coffea arabica L. was constructed based on a backcross population and RAPD markers. From a total of 178 markers evaluated, only 134 that segregated 1:1 (P>0.05) were used to develop the map. Seventeen markers were not linked, while 117 formed 11 linkage groups, covering a genome distance of 803.2 cM. The maximum distance between adjacent markers was 26.9 cM, and only seven intervals exceeded 20 cM. The markers were further used for assisted selection of the plants closest to the recurrent parent, to accelerate the introgression of rust resistance genes in the coffee breeding program. Three BC1 plants resistant to coffee leaf rust and with high genetic similarity to ?Catuaí? were selected and integrated in the following backcross cycles.
  • Imagem de Miniatura
    Item
    Sensory quality of Coffea arabica L. genotypes influenced by postharvest processing
    (Crop Breeding and Applied Biotechnology, 2019) Barbosa, Ivan de Paiva; Oliveira, Antonio Carlos Baião de; Rosado, Renato Domiciano Silva; Sakiyama, Ney Sussumu; Cruz, Cosme Damião; Pereira, Antônio Alves
    The specialty coffee market has grown significantly in the past decades and has several cultivars with productive potential. The objective of this study was to evaluate the sensory profile of the beverage produced from Coffea arabica L. genotypes based on postharvest processing and to identify cultivars with the greatest genetic potential for coffee cultivation in the city of Araponga, Minas Gerais, Brazil. The experiment was a randomized complete block design with two replicates and 11 genotypes with different levels of resistance to rust. The sensory profile demonstrated an interaction between the genotype and the processing technique. Five of the genotypes presented total scores above 85 points according to the SCAA protocol. Moreover, two of these genotypes yielded heightened sensory notes after undergoing dry processing. The selection of coffee genotypes should consider the level of technology involved in the drying of the coffee beans, which preserves the potential quality of the beverage.