Pesquisa Agropecuária Brasileira
URI permanente para esta coleçãohttps://thoth.dti.ufv.br/handle/123456789/9886
Navegar
125 resultados
Resultados da Pesquisa
Item Technological and nutritional aspects of dark chocolate with added coffee husk flour(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2024-07-19) Borges, Marília Viana; Leite, Cristina Xavier dos Santos; Santos, Ingrid Alves; Leão, Danilo Junqueira; Ferrão, Sibelli Passini Barbosa; Santos, Leandro Soares; Lima, Amanda Beatriz Sales de; Wobeto, Carmen; Lannes, Suzana Caetano da Silva; Silva, Marcondes Viana daThe objective of this work was to produce dark chocolates with the addition of coffee husk flour (CHF) and to evaluate the generated effects on their physical, physicochemical, microbiological, textural, and rheological characteristics. Husks of the Pacamara coffee (Coffea arabica) variety, produced under organic management, were used. The samples were previously dried, ground, and sieved at 0.250 mm. Five chocolate formulations were previously standardized at 55% content of cocoa solids (mass and cocoa butter) and at 0.4% soy lecithin. The addition of CHF was tested at the concentrations of 0, 2.5, 5.0, 7.5, and 10%, using a completely randomized design and three replicates. The addition of CHF up to 10% alters the physicochemical, textural, and rheological properties of the chocolate formulations, but without compromising their composition and quality. The tested formulations only differed regarding hardness and cohesiveness, evaluated in the texture profile. The hardness of the chocolate formulations increases as CHF is added.Item Maturation and detachment force for mechanized harvesting of irrigated Conilon coffee in the Brazilian Cerrado(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2023-02-17) Santin, Mateus Rollemberg; Amabile, Renato Fernando; Malaquias, Juaci Vitória; Veiga, Adriano Delly; Brige, Felipe Augusto Alves; Sala, Pedro Ivo Aquino LeiteThe objective of this work was to determine the force required to detach fruits of Conilon coffee (Coffea canephora) genotypes in five maturation stages, to determinate the best stage for mechanized harvest, and to verify the possibility of future selections of genotypes adapted to mechanized harvesting. Harvests were carried out in the 2013/2014 crop season, and the detachment force was determined based for six fruits from each side of the crop row, collected randomly from the middle third of the plants. The detachment force curve was obtained for each cycle through logistic regression, using the R software. According to the duration of their cycle, the genotypes were divided into super early, early, medium, and semilate; the values of the coefficients of the detachment force curve equation were also obtained. There is genetic variability regarding fruit detachment force throughout the maturation cycle, which indicates the possibility of selecting genotypes adapted to mechanized harvesting. Fruit detachment force shows a considerable drop in the final stages of maturation. The raisin stage is the best for the mechanized harvest of irrigated Conilon coffee in the Cerrado.Item Chemical attributes of an Oxisol with the addition of conilon coffee straw biochar(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2023) Alvarenga, Anarelly Costa; Passos, Renato Ribeiro; Andrade, Felipe Vaz; Mendonça, Eduardo de Sá; Rangel, Otacílio José Passos; Mosa, Lázaro LongueThe objective of this work was to evaluate the effects of increasing rates of biochar produced with coffee straw, at two pyrolysis temperatures, on the chemical attributes of an Oxisol cultivated with conilon coffee (Coffea canephora) and on the nutrient content of coffee tree leaves. Treatments consisted of pyrolysis at two temperatures (350 and 600 °C) and of five biochar rates (0, 5, 10, 15, and 20 Mg ha-1). The following soil chemical attributes were evaluated: pH in water; P, K, Ca, Mg, Al, H+Al, Zn, Cu, Fe, and Mn contents; effective and potential cation exchange capacity (CEC); sum of bases (SB); base (V) and aluminium (m) saturation; and N, P, K, Ca, Mg, Zn, Cu, Fe, and Mn contents in the leaves. The biochar produced at 600°C, at rates of 10 and 15 Mg ha-1, promoted a greater K release into the soil. Regardless of temperature, coffee straw biochar increased K and P availability, sum of bases, base saturation, and CEC in the soil, but did not influence macro- and micronutrient contents in the leaves. The addition of increasing rates of coffee straw biochar in the soil increases P, K, Mg, SB, CEC, and V, regardless of pyrolysis temperature.Item Morphophysiological responses of Conilon coffee matrix plants in a super-dense clonal garden(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2023-12-04) Silva, Josimar Aleixo da; Esposti, Marlon Dutra Degli; Senra, João Felipe de Brites; Comério, Marcone; Conceição, Amanda Oliveira da; Zacarias, Alex Justino; Milheiros, Idalina Sturião; Silva, Uliana Ribeiro; Silva, Fernanda Gomes da; Raimundo, Eduarda GonçalvesThe objective of this work was to evaluate the morphophysiological responses and cutting production of clones of Conilon coffee (Coffea canephora) cultivars in a super-dense clonal garden in the state of Espírito Santo, Brazil. The super-dense clonal garden was built in 2019 using 39 clones: 9, 9, 9, and 12 of cultivars Centenária ES8132, Diamante ES8112, ES8122 (Jequitibá), and Marilândia ES8143, respectively. The experiment was carried out in a randomized complete block design, with three replicates. Cutting production and the following morphophysiological traits were evaluated at 9 and 18 months after planting: chlorophyll index, normalized difference vegetation index, plant height, canopy height, canopy diameter, number of shoots, number of viable cuttings, number of leaves, fresh leaf mass, and plant fresh and dry matter mass. The super-dense clonal garden caused different morphophysiological responses among the studied clones. In general, clones C2, C5, C6, C8, D1, D8, D9, J8, M2, M9, M10, and M12 showed a higher mean cutting production, whereas C4, J1, J4, M4, and M5 were the most sensitive to the super-dense regime. Under these conditions, it is recommended to increase the proportion of matrix plants of the latter clones.Item Chemical attributes of an Oxisol with the addition of conilon coffee straw biochar(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2023-05-19) Alvarenga, Anarelly Costa; Passos, Renato Ribeiro; Andrade, Felipe Vaz; Mendonça, Eduardo de Sá; Rangel, Otacílio José Passos; Mosa, Lázaro LongueThe objective of this work was to evaluate the effects of increasing rates of biochar produced with coffee straw, at two pyrolysis temperatures, on the chemical attributes of an Oxisol cultivated with conilon coffee (Coffea canephora) and on the nutrient content of coffee tree leaves. Treatments consisted of pyrolysis at two temperatures (350 and 600°C) and of five biochar rates (0, 5, 10, 15, and 20 Mg ha-1). The following soil chemical attributes were evaluated: pH in water; P, K, Ca, Mg, Al, H+Al, Zn, Cu, Fe, and Mn contents; effective and potential cation exchange capacity (CEC); sum of bases (SB); base (V) and aluminium (m) saturation; and N, P, K, Ca, Mg, Zn, Cu, Fe, and Mn contents in the leaves. The biochar produced at 600°C, at rates of 10 and 15 Mg ha-1, promoted a greater K release into the soil. Regardless of temperature, coffee straw biochar increased K and P availability, sum of bases, base saturation, and CEC in the soil, but did not influence macro- and micronutrient contents in the leaves. The addition of increasing rates of coffee straw biochar in the soil increases P, K, Mg, SB, CEC, and V, regardless of pyrolysis temperature.Item Morphophysiological responses of Conilon coffee matrix plants in a super-dense clonal garden(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2023-12-04) Silva, Josimar Aleixo da; Esposti, Marlon Dutra Degli; Senra, João Felipe de Brites; Comério, Marcone; Conceição, Amanda Oliveira da; Zacarias, Alex Justino; Milheiros, Idalina Sturião; Silva, Uliana Ribeiro; Silva, Fernanda Gomes da; Raimundo, Eduarda GonçalvesThe objective of this work was to evaluate the morphophysiological responses and cutting production of clones of Conilon coffee (Coffea canephora) cultivars in a super-dense clonal garden in the state of Espírito Santo, Brazil. The super-dense clonal garden was built in 2019 using 39 clones: 9, 9, 9, and 12 of cultivars Centenária ES8132, Diamante ES8112, ES8122 (Jequitibá), and Marilândia ES8143, respectively. The experiment was carried out in a randomized complete block design, with three replicates. Cutting production and the following morphophysiological traits were evaluated at 9 and 18 months after planting: chlorophyll index, normalized difference vegetation index, plant height, canopy height, canopy diameter, number of shoots, number of viable cuttings, number of leaves, fresh leaf mass, and plant fresh and dry matter mass. The super-dense clonal garden caused different morphophysiological responses among the studied clones. In general, clones C2, C5, C6, C8, D1, D8, D9, J8, M2, M9, M10, and M12 showed a higher mean cutting production, whereas C4, J1, J4, M4, and M5 were the most sensitive to the super-dense regime. Under these conditions, it is recommended to increase the proportion of matrix plants of the latter clones.Item New model of clonal garden for the production of robusta coffee plantlets(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-09-12) Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Diocleciano, João Maria; Rocha, Rodrigo Barros; Dias, Jairo Rafael Machado; Verdin Filho, Abraão CarlosThe objective of this work was to evaluate the production of cuttings of Coffea canephora genotypes, in a new system for training mother plants called “vertical clonal garden”. The proposed new system consists of training coffee plants with only one shoot and without bending the main shoot, so that the secondary orthotropic shoots, from which the clonal cuttings will be taken, are formed across the length of the stem in the vertical direction. The capacity for the production of cuttings of ten hybrid genotypes of coffee plants was evaluated over ten production cycles. The 'BRS 2314', 'BRS 3213', and 'BRS 3210' genotypes showed cutting production per cut of 425,000 cuttings per hectare, considered above the obtained average. The 'BRS 3193', 'BRS 2336', 'BRS 3220', and 'BRS 3137' genotypes were the least productive. Coffee plants trained in the “vertical clonal garden” system can produce about 425,000 cuttings per hectare per harvest period or about 1.275 million cuttings per hectare per year, over three harvest periods, with a greater ease in crop management and treatments.Item Morphological, physiological, and agronomic traits of crossings of 'Icatu' x 'Catimor' coffee tree subjected to water deficit(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-07-27) Coelho, Larissa Sousa; Tassone, Guilherme Augusto Teixeira; Carvalho, Gladyston Rodrigues; Silva, Vânia Aparecida; Viana, Mariana Thereza Rodrigues; Pereira, Fernanda Aparecida Castro; Nadaleti, Denis Henrique Silva; Silveira, Helbert Rezende de Oliveira; Botelho, Cesar EliasThe objective of this work was to select genotypes of Coffea arabica with good yield and potential tolerance to water deficit, as well as to try to understand the physiological and anatomical mechanisms involved in the adaptability of these genotypes to water stress. The physiological, anatomical, and agronomic traits of 19 genotypes of C. arabica were evaluated under the two following water conditions: regular irrigation and no irrigation (soil water deficit). The 'IPR 100', 2, 5, and 7 genotypes showed agronomic, physiological, and anatomical traits that contributed to a better water status maintenance in the initial development of coffee plants. Based on these results, these genotypes are potentially tolerant to water deficit. The 4, 10, 11, 14, 15, and 'Bourbon Amarelo IAC J10' genotypes show a lower adaptability of the anatomical structures under soil-water deficit conditions. The coffee tree genotypes display leaf plasticity, such as the thickness of palisade and spongy parenchyma, and the number, position, dimensions, and mobility of stomata under water deficit conditions.Item Expression of self-incompatibility in Coffea canephora genotypes grown in the western Amazon(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-12-05) Depolo, Rodrigo Prado; Rocha, Rodrigo Barros; Souza, Carolina Augusto de; Santos, Maurício Reginaldo Alves dos; Espindula, Marcelo Curitiba; Teixeira, Alexsandro LaraThe objective of this work was to characterize the expression of gametophytic self-incompatibility in a Coffea canephora breeding population, to assist in the management and development of new cultivars. For that purpose, 550 in vitro pollinations were carried out among 62 parent plants, of which 27 were from the conilon botanical variety and 35 from the robusta. Thirty-two genotypes compatible with all previously known testers were identified, suggesting the existence of new compatibility groups. From these results, hybridizations were carried out in a complete diallel design with reciprocal crosses to characterize new test plants. Based on the compatibility response with the test plants, the genotypes were clustered into the six following groups: group I, 11 (17.74%) genotypes; group II, 13 (20.97%); group III, 6 (9.68%); group IV, 9 (14.52%); group V, 8 (12.90%); and group VI, 15 (24.19%). The genotypes of the botanical variety robusta show a higher frequency of plants in compatibility group VI and a greater genetic variability, whereas those of the conilon variety have a higher frequency of plants in compatibility group II. The identification of new compatibility groups assists in new management practices that seek to increase the efficiency of pollination by favoring, through natural means, fully compatible crosses.Item Brown eye spot incidence during the vegetative stage of coffee grown in soil under sustainable management(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-08-29) Resende, Laís Sousa; Pozza, Edson Ampélio; Luz, André Luís Faustino; Souza, Paulo Estevão de; Vilela, Marina Scalioni; Castanheira, Dalyse Toledo; Guimarães, Rubens JoséThe objective of this work was to evaluate the influence of different soil coverings, fertilizer types, and soil conditioners on the incidence and severity of brown eye spot (Cercospora coffeicola) in coffee (Coffea arabica) during the vegetative stage. The experiment was carried out in a randomized complete block design, in a 3×2×5 factorial arrangement (soil coverings × fertilizer types × soil conditioners) in subdivided plots, with three replicates. Comparisons were made among: three soil covering (plastic film, Urochloa decumbens, and no covering) in the plots; two fertililizer types (conventional and controlled release) in the sub-plots; and four soil conditioners (coffee husk, agricultural gypsum, water retention polymer, and organic compound), as well as the control, in the sub-sub-plots. The area under the progress curve for disease incidence and severity showed the lowest mean without soil covering, whereas that for number of leaves was greater with the use of the controlled-release fertilizer. The plastic film provided a greater soil moisture and a lower soil resistance penetration. The chemical composition of the organic compound reduced coffee plants growth. Soil covering with plastic film or U. decumbens favors the high incidence of brown eye spot; however, it provides a greater soil moisture and, therefore, improves the growth of coffee plants in the vegetative stage.