Biblioteca do Café
URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/1
Navegar
18 resultados
Resultados da Pesquisa
Item Grain yield of coffee plants fertilized with different doses of 20-00-20 NPK formulation under rainfed conditions(Universidade Federal Rural do Semi-Árido, 2021-07-12) Torres, Josemar Dávila; Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento De; Marcolan, Alaerto Luiz; Rocha, Rodrigo BarrosLittle is known about the management of high-yield clonal Coffea canephora in the Amazonian Region, mainly for nutritional aspects and cultivation system efficiency. This study aimed to evaluate the influence of different nitrogen and potassium fertilization rates on coffee grain yield and fertilizer use efficiency of C. canephora trees. An experiment was performed at an experimental field of the Embrapa Rondônia in Porto Velho (RO), Brazil. It was carried out in a split-plot scheme with six doses of 20-00-20 NPK formulation (0; 250; 500; 1,000; 2,000; and 3,000 kg ha-1) and three years of evaluation (2014, 2015, and 2016). An interaction between fertilizer dose and crop year was observed. Fertilizer doses showed an exponential behavior, with maximum yields of 51, 114, and 79 bags ha-1 at 3,000 kg ha-1 in the crop years of 2014, 2015, and 2016, respectively. Such a behavior impacted average and accumulated yields in the three harvest seasons. As for crop year effect within each fertilizer dose, the highest yield was reached in the second harvest after pruning for renewal of orthotropic stems. Moreover, fertilizer use efficiency by plants decreased exponentially, with the highest value at the lowest dose. Increasing doses of 20-00-20 formulation promoted an exponential increase in grain yield but decreased its use efficiency by C. canephora plants. This management also stimulated a strong biannual production.Item New model of clonal garden for the production of robusta coffee plantlets(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-09-12) Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Diocleciano, João Maria; Rocha, Rodrigo Barros; Dias, Jairo Rafael Machado; Verdin Filho, Abraão CarlosThe objective of this work was to evaluate the production of cuttings of Coffea canephora genotypes, in a new system for training mother plants called “vertical clonal garden”. The proposed new system consists of training coffee plants with only one shoot and without bending the main shoot, so that the secondary orthotropic shoots, from which the clonal cuttings will be taken, are formed across the length of the stem in the vertical direction. The capacity for the production of cuttings of ten hybrid genotypes of coffee plants was evaluated over ten production cycles. The 'BRS 2314', 'BRS 3213', and 'BRS 3210' genotypes showed cutting production per cut of 425,000 cuttings per hectare, considered above the obtained average. The 'BRS 3193', 'BRS 2336', 'BRS 3220', and 'BRS 3137' genotypes were the least productive. Coffee plants trained in the “vertical clonal garden” system can produce about 425,000 cuttings per hectare per harvest period or about 1.275 million cuttings per hectare per year, over three harvest periods, with a greater ease in crop management and treatments.Item Yield of robusta coffee in different spatial arrangements(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2021-12-10) Espindula, Marcelo Curitiba; Tavella, Leonardo Barreto; Schmidt, Raquel; Rocha, Rodrigo Barros; Dias, Jairo Rafael Machado; Bravin, Maísa Pinto; Partelli, Fábio LuizThe objective of this work was to determine the contribution of the number of stems to the composition of individual plant yield, and to individual and overall robusta coffee (Coffea canephora) yield at different planting densities, using a fixed number of stems per plant. The experiment was carried out in two phases. The first phase was performed from 2011 to 2015, in the municipality of Ouro Preto do Oeste, in the state of Rondônia (RO), Brazil, to evaluate different numbers of stems per plant (1, 2, 3, 4, 5, and 6). The second phase was conducted from 2013 to 2018, in the municipality of Alta Floresta D’Oeste, RO, to evaluate plant densities (at 1,666, 1,904, 2,222, 2,666, and 3,333 plants ha-1), with an initial density of four stems per plant in all treatments. The increase of number of stems per plant promotes a quadratic response to the average and cumulated yield of coffee plants, and the maximum yield is attained with four stems per plant. The number of stems should not exceed four, to avoid their tipping during years of high production. Plant density of 3,333 plants per hectare, with 4 stems per plant and 1 m spacing, promotes the reduction of individual plant yield; however, it results in higher overall crop yield.Item Growth and physiological quality in clonal seedlings of Robusta coffee(Universidade Federal do Ceará, 2020) Giuriatto Júnior, Jurandyr José Ton; Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Vasconcelos, Jaqueline Martins; Campanharo, MarcelaThe intrinsic characteristics of the vegetative propagule may influence the rooting speed and shoot growth, as well as the final physiological quality of clonal seedlings of Coffea canephora. The aim of this study was to evaluate the growth and physiological quality of ‘Robusta’ coffee seedlings produced from propagules (stem cuttings) with different cutting ages. The study was conducted in a greenhouse, in the district of Ouro Preto do Oeste, in Rondônia, Brazil (10˚45’43” S and 62˚15’10” W). The ages of the cuttings were 30, 60, 90, 120 and 150 days, corresponding to five positions on the secondary orthotropic stem (sprout), from the apex to the base. Dry matter accumulation, and relative and absolute growth rates were evaluated for 188 days after cutting, as well as the vegetative characteristics of the seedlings at 125 days after cutting. It appears that growth can be divided into three phases: 1) Initial: slow growth, lasting approximately 83 days; 2) Intermediate: fast growth, lasting approximately 40 days; and 3) Final: slow growth, starting approximately 125 days after cutting. With physiological quality, although all the cuttings showed similar growth curves, those of 60, 90 and 120 days produced, 125 days after cutting, the best vegetative performance in the seedlings.Item With different doses of 20-00-20 NPK formulation under rainfed conditions(Universidade Federal Rural do Semi-Árido, 2021) Torres, Josemar Dávila; Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Marcolan, Alaerto Luiz; Rocha, Rodrigo BarrosLittle is known about the management of high-yield clonal Coffea canephora in the Amazonian Region, mainly for nutritional aspects and cultivation system efficiency. This study aimed to evaluate the influence of different nitrogen and potassium fertilization rates on coffee grain yield and fertilizer use efficiency of C. canephora trees. An experiment was performed at an experimental field of the Embrapa Rondônia in Porto Velho (RO), Brazil. It was carried out in a split-plot scheme with six doses of 20-00-20 NPK formulation (0; 250; 500; 1,000; 2,000; and 3,000 kg ha-1) and three years of evaluation (2014, 2015, and 2016). An interaction between fertilizer dose and crop year was observed. Fertilizer doses showed an exponential behavior, with maximum yields of 51, 114, and 79 bags ha-1 at 3,000 kg ha-1 in the crop years of 2014, 2015, and 2016, respectively. Such a behavior impacted average and accumulated yields in the three harvest seasons. As for crop year effect within each fertilizer dose, the highest yield was reached in the second harvest after pruning for renewal of orthotropic stems. Moreover, fertilizer use efficiency by plants decreased exponentially, with the highest value at the lowest dose. Increasing doses of 20-00-20 formulation promoted an exponential increase in grain yield but decreased its use efficiency by C. canephora plants. This management also stimulated a strong biannual production.Item Amazonian Robustas - new Coffea canephora coffee cultivars for the Western Brazilian Amazon(Crop Breeding and Applied Biotechnology, 2020) Teixeira, Alexsandro Lara; Rocha, Rodrigo Barros; Espindula, Marcelo Curitiba; Ramalho, André Rostand; Vieira Júnior, José Roberto; Alves, Enrique Anastácio; Lunz, Aureny Maria Pereira; Souza, Flávio de França; Costa, José Nilton Medeiros; Fernandes, Cleberson de FreitasAmazonian Robustas are ten new clones of high yield potential with characteristics typical of the botanical varieties conilon and robusta. With individual registration, the new cultivars were developed to be grown together with other clones, with flexibility of composition of the crops according to the preference of the producer.Item Concentration and accumulation of micronutrients in robust coffee(Editora da Universidade Estadual de Maringá - EDUEM, 2019) Dubberstein, Danielly; Partelli, Fabio Luiz; Espindula, Marcelo Curitiba; Dias, Jairo Rafael MachadoKnowledge on the dynamics of micronutrients in coffee tree assists nutritional diagnosis and fertilization management. Therefore, the objective of this study was to evaluate the concentration and accumulation of micronutrients in the leaves and fruits of Coffea canephora. The experiment was managed in crops propagated for 2.5 years in a split-plot-in-time scheme in which the main plots consisted of fertilized and not-fertilized plants, and the subplots stipulated the evaluation periods. The berries and leaves were collected every 28 days, starting from the first flowering to full maturity. The micronutrient content was determined by laboratory chemical analysis, and the accumulation of nutrients in the fruit (mg) was calculated by multiplying the dry matter of the berry (g) × nutrient concentration (mg kg−1). The results showed that fertilization infers the zinc concentration in the fruits and the concentration for manganese, iron and zinc in the leaves in the determined periods. Micronutrient accumulation curves followed the simple sigmoidal model, with accumulation increasing considerably as a function of fruit growth. Thus, fertilization based on micronutrients must be divided over stages with higher accumulation rates, considering the specific requirement of each nutrient.Item Microclimatic characterization of conilon coffee cultivate dinnorth-south alignment in northen Espírito Santo state, Brazil(Editora UFLA, 2019-10) Bis, Ana Paula Pereira; Partelli, Fábio Luiz; Rodrigues, Weverton Pereira; Falqueto, Antelmo Ralph; Espindula, Marcelo Curitiba; Martins, Lima DeleonThe objective in this work was to study the influence of the North-South plantation alignment with respect to microclimatic, growth, and mineral nutrition conditions in order to quantify the variables and to point out possible consequences for the coffee tree. The experiment was carried out in a 6-year-old conilon coffee (Coffea canephora) crop with a mean height of 1.6 m, cultivated in full sun and spaced 3.5 m x 1.0 m. The data were collected on four dates from December 2016 to September 2017 in North Espírito Santo State, Brazil. The irradiance, air temperature, and vapor pressure deficit variables were quantified by means of external data loggers. The leaf temperature was determined by means of thermal images, and the plant growth and nutrient concentration in the leaves on both sides of the plant (East and West) were evaluated. The West side of the plant showed higher values of irradiance, temperature, and vapor pressure deficit in the afternoon, reaching a difference of 5°C between the two sides. The leaf temperature had similar behavior to air temperature, reaching a difference of approximately 12°C between the two sides in the afternoon. Although significant differences were observed for some nutrients between the sides of the plant, macro and micronutrient leaf contents remained within the range considered adequate for the coffee tree.Item Robustas amazônicos: novas cultivares híbridas de café canéfora para a Amazônia Ocidental(Embrapa Café, 2019-10) Teixeira, Alexsandro Lara; Rocha, Rodrigo Barros; Espindula, Marcelo Curitiba; Ramalho, André Rostand; Vieira Junior, José Roberto; Alves, Enrique Anastacio; Ferro, Gilvan de Oliveira; Diocleciano, João Maria; Moraes, Marcos Santana; Lourenço, João Luiz Resende; Teles, Crhistofer Fernandes RosaVisando oferecer novas opções para o cultivo e contribuir para aumento da variabilidade genética da cafeicultura na Amazônia Ocidental, a Embrapa Rondônia desenvolveu 10 novas cultivares com alto potencial produtivo e com características agronômicas típicas das variedades botânicas Conilon e Robusta. Esse trabalho é resultado de 16 anos de pesquisa, tendo sido iniciado no ano de 2003, a partir da hibridação controlada entre plantas matrizes das variedades Conilon e Robusta do Banco Ativo de Germoplasma da Embrapa. As novas cultivares foram desenvolvidas a partir de cruzamentos entre plantas das variedades botânicas Conilon e Robusta. Os cruzamentos foram realizados no ano de 2003 no campo experimental de Embrapa Rondônia, utilizando matrizes da variedade botânica Robusta (Robustas 2258, 1675, 640) e matriz da variedade botânica Conilon (Encapa 03). No período de 2003 a 2010 essas plantas foram avaliadas em ensaios no município de Ouro Preto do Oeste, e selecionadas para serem avaliadas em diferentes ambientes juntamente com clones provenientes de polinização aberta. As cultivares de polinização aberta BRS 2299 e BRS 2357 foram selecionadas da Cultivar Conilon - BRS Ouro Preto, desenvolvida pela Embrapa no ano de 2013. No período de 2011 a 2018, os genótipos selecionados foram avaliados nos ambientes de Porto Velho, Alta Floresta do Oeste, Ouro Preto do Oeste e Ariquemes no estado de Rondônia e Rio Branco, no estado do Acre. Dos quatro ambientes avaliados, o experimento de Alta Floresta D’Oeste foi o que apresentou melhores condições ambientais para expressão do potencial genético das cultivares. Neste ambiente, a média geral das cultivares, nos três anos de avaliação foi de 93 sacas por hectare, com destaque para as cultivares BRS 1216, BRS 3210 e BRS 2336 que produziram mais de 100 sacas na média dos três anos.Item Dry matter and macronutrient accumulation in fruits of conilon coffee with different ripening cycles(Sociedade Brasileira de Ciência do Solo, 2014-01) Partelli, Fábio Luiz; Espindula, Marcelo Curitiba; Marré, Wellington Braida; Vieira, Henrique DuarteThe period between anthesis and fruit ripening varies according to the Conilon coffee (Coffea canephora) genotype. Therefore, the time of the nutritional requirements for fruit formation may differ, depending on the formation phase and the genotype, and may directly affect split application of fertilizer. The aim of this study was to quantify the accumulation of dry matter and N, P, K, Ca, Mg and S at several stages in the fruit of the Conilon coffee genotype with different ripening cycles, which may suggest the need for split application of fertilizer in coffee. The experiment was carried out in the municipality of Nova Venecia, Espírito Santo, Brazil, throughout the reproductive cycle. The treatments were composed of four coffee genotypes with different ripening cycles. A completely randomised experimental design was used. with five replicates. Plagiotropic branches were harvested from flowering to fruit ripening at 28-day intervals to determine the dry matter of the fruits and the concentration and accumulation of the nutrients they contained. The behavior of dry matter and macronutrient accumulation during the study period was similar and increasing, but it differed among genotypes sampled in the same season. Early genotypes exhibited a higher speed of dry matter and nutrient accumulation. Split application of fertilizer should differ among coffee genotypes with different ripening cycles (early, intermediate, late and very late).