Biblioteca do Café
URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/1
Navegar
40 resultados
Resultados da Pesquisa
Item Characterization and genetic diversity of Coffea canephora accessions in a germplasm bank in Espírito Santo, Brazil(Crop Breeding and Applied Biotechnology, 2021-06-20) Ferrão, Maria Amélia Gava; Mendonça, Rodolfo Ferreira de; Fonseca, Aymbiré Francisco Almeida; Ferrão, Romário Gava; Senra, João Felipe Brites; Volpi, Paulo Sérgio; Verdin Filho, Abraão Carlos; Comério, MarconeThe state of Espírito Santo is the major producer of Coffea canephora in Brazil. Knowledge of genetic reserves is fundamental to plant breeding. Therefore, the present study characterized and analyzed the genetic diversity of 600 C. canephora accessions from the germplasm bank of Incaper based on 38 traits evaluated in 24-30-month-old plants. Further, the predominant descriptors or traits were identified, and high phenotypic variability was determined. Genetic distances for the grouped (Gower), quantitative, and qualitative datasets were 0.48, 0.61, and 0.92, respectively, with accessions 76 (Conilon) and 407 (Robusta) being the most divergent ones at Incaper. In clustering using the Tocher optimization method, 30 groups were formed, with three accessions introduced from Epamig’s Robusta collection being the most dissimilar ones. Graphical dispersion analysis using the principal coordinate method revealed the predominance of three groups formed by the Robusta, Conilon, and hybrid Robusta × Conilon genotypes.Item Poda programada de ciclo para o café conilon - PPC: técnica para produção e revigoramento de lavouras(Incaper, 2022-06) Verdin Filho, Abraão Carlos; Volpi, Paulo Sérgio; Fonseca, Aymbiré Franscisco Almeida da; Ferrão, Maria Amélia Gava; Ferrão, Romário Gava; Comério, Marcone; Senra, João Felipe; Posse, Sheila Cristina Prucoli; Machado, José Sebastião Silveira; Batista, Thomaz SilveiraItem 'ES8161 Goytacá': porta-enxerto clonal de café Conilon resistente a nematoide-das-galhas(Incaper, 2022-07) Lima, Inorbert de Melo; Ventura, José Aires; Costa, Hélcio; Volpi, Paulo Sérgio; Ferrão, Maria Amélia Gava; Verdin Filho, Abraão Carlos; Ferrão, Romário Gava; Fonseca, Aymbiré Francisco Almeida da; Comério, MarconeItem New model of clonal garden for the production of robusta coffee plantlets(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-09-12) Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Diocleciano, João Maria; Rocha, Rodrigo Barros; Dias, Jairo Rafael Machado; Verdin Filho, Abraão CarlosThe objective of this work was to evaluate the production of cuttings of Coffea canephora genotypes, in a new system for training mother plants called “vertical clonal garden”. The proposed new system consists of training coffee plants with only one shoot and without bending the main shoot, so that the secondary orthotropic shoots, from which the clonal cuttings will be taken, are formed across the length of the stem in the vertical direction. The capacity for the production of cuttings of ten hybrid genotypes of coffee plants was evaluated over ten production cycles. The 'BRS 2314', 'BRS 3213', and 'BRS 3210' genotypes showed cutting production per cut of 425,000 cuttings per hectare, considered above the obtained average. The 'BRS 3193', 'BRS 2336', 'BRS 3220', and 'BRS 3137' genotypes were the least productive. Coffee plants trained in the “vertical clonal garden” system can produce about 425,000 cuttings per hectare per harvest period or about 1.275 million cuttings per hectare per year, over three harvest periods, with a greater ease in crop management and treatments.Item Selection of Conilon coffee clones for the Zona da Mata region of Minas Gerais, Brazil(Universidade Federal de Lavras, 2022-06-09) Moura, Waldênia de Melo; Pedrosa, Adriene Woods; Oliveira, Rebeca Lourenço de; Cecon, Paulo Roberto; Ferrão, Romário Gava; Ferrão, Maria Amélia Gava; Verdin Filho, Abraão CarlosRecently, the cultivation of Coffea canephora species has expanded as a consequence of climate change effects and emerging markets that use this cof-fee as raw material. To meet such demands of production, it is necessary to also improve yield in cultivated areas. Hence, this study aimed to evaluate Conilon coffee clones to identify the most promising fitting material for the Zona da Mata region of Minas Gerais, as well as to analyze the effect of the genotype x biennium interaction and estimate correlation coefficients among evaluated characteristics. Vegetative vigor, yield, main pests and diseases were evaluated in 36 clones from Incaper, ES. The statistical analyses considered the averages of each biennium: Biennium 1 (B1) - 2005/2006; Biennium 2 (B2) - 2007/2008; Biennium 3 (B3) - 2009/2010, and also the average of three biennia (A3B). Univariate and joint statistical analysis were performed, as well as estimates of phenotypic, genotypic and environmental correlation coefficients among assessed characteristics. A wide variability among clones was observed for most of the evaluated characteristics for both each biennium and the average of three biennia. The severities of most diseases have reduced over the years of cultivation. The genotypic correlation coefficients have overcome phenotypic and environmental ones. In general, pests and diseases severities showed significant and negative correlations with vegetative vigor and yield. On the other hand, the last two characteristics were posi-tively correlated. It was also evidenced a certain diversity among clones for most of the evaluated traits. Clone x biennium interaction was significant only for yield and leaf rust severity. There are negative correlations among the characteristics associated with yield and pests and diseases occurrences, which make it possible the use of yield variable as a selection parameter. Clones 24, 23, 28, 26, 21, 29 and 06 MG/ES present a higher potential for cultivation in the Zona da Mata of Minas Gerais.Item Characterization and genetic diversity of Coffea canephora accessions in a germplasm bank in Espírito Santo, Brazil(Crop Breeding and Applied Biotechnology, 2021) Ferrão, Maria Amélia Gava; Mendonça, Rodolfo Ferreira de; Fonseca, Aymbiré Francisco Almeida; Ferrão, Romário Gava; Senra, João Felipe Brites; Volpi, Paulo Sérgio; Verdin Filho, Abraão Carlos; Comério, MarconeThe state of Espírito Santo is the major producer of Coffea canephora in Brazil. Knowledge of genetic reserves is fundamental to plant breeding. Therefore, the present study characterized and analyzed the genetic diversity of 600 C. canephora accessions from the germplasm bank of Incaper based on 38 traits evaluated in 24-30-month-old plants. Further, the predominant descriptors or traits were identified, and high phenotypic variability was determined. Genetic distances for the grouped (Gower), quantitative, and qualitative datasets were 0.48, 0.61, and 0.92, respectively, with accessions 76 (Conilon) and 407 (Robusta) being the most divergent ones at Incaper. In clustering using the Tocher optimization method, 30 groups were formed, with three accessions introduced from Epamig’s Robusta collection being the most dissimilar ones. Graphical dispersion analysis using the principal coordinate method revealed the predominance of three groups formed by the Robusta, Conilon, and hybrid Robusta × Conilon genotypes.Item Cycle pruning programmed on the grain yield of arabica coffee(Editora UFLA, 2019) Baitelle, Diego Corona; Verdin Filho, Abraão Carlos; Freitas, Sílvio de Jesus; Miranda, Guilherme Bessa; Vieira, Henrique Duarte; Vieira, Kezia MoraesThe cycle pruning programmed is a reinvigoration technique widely employed in Conilon coffee. This strategy may also be adopted for Arabica coffee to increase its crop longevity and yield. In this scenario, the present study proposes to examine the influence of the cycle pruning programmed on the vegetative and productive development of Arabica coffee. The experiment was developed in the field as a randomized-block design with four replicates. Treatments were tested in a 4 × 2 factorial arrangement consisting of four stem densities (4000, 8000, 12000 or 16000 stems ha-1) and two management strategies for the removal of plagiotropic branches (annual or biennial removal of branches which had reached 70% or more of their production capacity). For some variables, the treatments were organized as a 4 × 2 × 2 factorial arrangement in which the last factor corresponded to two regions of data collection in the plant (upper or lower). For all factorial arrangements, an additional treatment (control) was employed corresponding to traditional pruning (recepa). Annual or biennial removal of plagiotropic branches which had attained 70% or more of their production capacity can be adopted with no losses to crop yield. The cycle pruning programmed improves the distribution of branches, increases canopy area and prevents the occurrence of the “naked neck” phenomenon, observed in control treatment. Additionally, it provides better agronomic and productive performance; therefore, it can be used as a substitute for recepa.Item Planococcus spp.: behavior and monitoring in conilon coffee crops(Editora UFLA, 2021) Borghi, Edinei José Armani; Fornaciari, Gabriel; Vieira, Mayara Leite; Aguiar, Ronilda Lana; Holtz, Anderson Mathias; Verdin Filho, Abraão Carlos; Comério, Marcone; Andrade Júnior, Saul de; Carvalho, José Romário deThe damage caused by the citrus mealybug attack, Planococcus spp., on Coffea canephora crops is becoming more and more frequent, and may cause losses close to 100%. Knowledge of aspects related to pest behavior and adoption of methods to monitor crop incidence are important tools for integrated pest management. Thus, the objective was to study the behavior of citrus mealybug along the phenological stages of C. canephora and to propose methods to monitor its occurrence in the crops. The study was carried out in an area consisting of adult C. canephora plants of the variety Diamante ES 8112. The study was carried out using four sampling methods: 1) soil and root sampling with a probe; 2) opening small trenches; 3) plagiotropic branches and 4) weed sampling. Evaluations were carried out monthly by checking and confirming the presence of citrus mealybug in the sampled regions. The information obtained was used to describe the behavior of citrus mealybug and to analyze the applicability of the monitoring methods studied. In the absence of the reproductive phase, citrus mealybug lodges in the root system of coffee and weeds, in the region close to the colon, moving to the aerial part of the plants (rosettes) at the beginning of the flowering of the crop. Probe sampling was not efficient, while opening small trenches is a difficult procedure and causes damage to the root system of the coffee tree. The sampling of plagiotropic branches and weeds allows the monitoring of citrus mealybug duringall the phenological phases of C. canephora.Item Implications of the cut type and apex length of stem cuttings used for the production of plantlets of Conilon coffee(Editora UFLA, 2020) Verdin Filho, Abraão Carlos; Freitas, Silvio de Jesus; Comério, Marcone; Volpi, Paulo Sérgio; Colodetti, Tafarel Victor; Rodrigues, Wagner Nunes; Fonseca, Aymbiré Francisco Almeida da; Posse, Sheila Cristina Pruculi; Fontes, Alexandre Gomes; Christo, Bruno Fardim; Vieira, Luciano Junior DiasProducing plantlets of Conilon coffee within the specific recommendations and with a high level of quality is fundamental since it is capable of promoting the initial development of the crops. To identify the best protocol to prepare the stem cuttings is fundamental to the process of plantlet production of the species. In this context, this study aimed to evaluate the implications of the type of apex cutting and the length of the remaining apex of stem cuttings to produce plantlets of Conilon coffee (Coffea canephora). To this end, two trials were conducted in the Marilândia Experimental Farm (Instituto Capixaba de Pesquisa, Assistência Técnica e Extensão Rural, Marilândia-ES). The first trial evaluated the types of apex cutting (straight or bevel cut), and the second trial studied the different lengths of the remaining apex (0.5, 1.0, 1.5, 2.0, and 2.5 cm). Characteristics of the vegetative growth and photosynthetic traits of the plantlets of Conilon coffee were evaluated after 120 days of cultivation in a nursery. The biomass accumulation of the plantlets of Conilon coffee produced by stem cutting may be favored by the use of bevel cut on the apex. The length of the remaining apex does not seem to have a expressive effect over the quality or growth of the plantlets, being only possible to observe effects for leaf area and biomass accumulation.Item Impact of drying methods over the germinative potenti al of conilon coffee of late maturation(Editora UFLA, 2019-10) Posse, Sheila Cristina Prucoli; Rodrigues, Wagner Nunes; Comério, Marcone; Volpi, Paulo Sérgio; Verdin Filho, Abraão Carlos; Posse, Robson Prucoli; Oliveira, Vinicius de Souza; Arantes, Sara DousseauThis study aimed to evaluate the effect of different drying methods (regarding temperature and drying time) over the seed moisture and germination of seeds of Coffea canephora, harvested from genotypes of late maturation. For this end, seeds from selected genotypes were harvested and dried using two different methods: drying at 25 ˚C with natural circulation of air and drying at 35 ˚C with artificial circulation of air. The seeds were evaluated to quantify the loss of moisture content, and their germinative potential was assessed by parameters of germination speed, and the proportion of seedlings with healthy germination originated from them. The results show it is possible to apply different drying methods; using different systems, temperatures and times of exposure; to decrease the moisture content of seeds of C. canephora, from 50% (freshly harvested seeds from genotypes of late maturation, in July) to under 18% (dried seeds). Even if the initial stages of the drying process, while the seeds still present high moisture content, are similar for both methods, the method with artificial circulation of air at 35 ˚C promotes the drying speed and is able to achieve the lower levels of seed moisture using less than half of the time required by method with natural circulation of air at 25 ˚C. This faster moisture removal, however, has negative impacts over the germinative potential of the seeds, which are not observed for seeds subjected to the slow natural drying.