Periódicos
URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3352
Navegar
16 resultados
Resultados da Pesquisa
Item Grain yield of coffee plants fertilized with different doses of 20-00-20 NPK formulation under rainfed conditions(Universidade Federal Rural do Semi-Árido, 2021-07-12) Torres, Josemar Dávila; Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento De; Marcolan, Alaerto Luiz; Rocha, Rodrigo BarrosLittle is known about the management of high-yield clonal Coffea canephora in the Amazonian Region, mainly for nutritional aspects and cultivation system efficiency. This study aimed to evaluate the influence of different nitrogen and potassium fertilization rates on coffee grain yield and fertilizer use efficiency of C. canephora trees. An experiment was performed at an experimental field of the Embrapa Rondônia in Porto Velho (RO), Brazil. It was carried out in a split-plot scheme with six doses of 20-00-20 NPK formulation (0; 250; 500; 1,000; 2,000; and 3,000 kg ha-1) and three years of evaluation (2014, 2015, and 2016). An interaction between fertilizer dose and crop year was observed. Fertilizer doses showed an exponential behavior, with maximum yields of 51, 114, and 79 bags ha-1 at 3,000 kg ha-1 in the crop years of 2014, 2015, and 2016, respectively. Such a behavior impacted average and accumulated yields in the three harvest seasons. As for crop year effect within each fertilizer dose, the highest yield was reached in the second harvest after pruning for renewal of orthotropic stems. Moreover, fertilizer use efficiency by plants decreased exponentially, with the highest value at the lowest dose. Increasing doses of 20-00-20 formulation promoted an exponential increase in grain yield but decreased its use efficiency by C. canephora plants. This management also stimulated a strong biannual production.Item In vitro pollination and fluorescence microscopy for characterization of gametophytic selfincompatibility of Coffea canephora Pierre ex A. Froehner(Crop Breeding and Applied Biotechnology, 2021-11-20) Souza, Carolina Augusto de; Rocha, Rodrigo Barros; Santos, Maurício Reginaldo Alves dos; Lopes, Tatiane Almeida; Teixeira, Alexsandro Lara; Espindula, Marcelo CuritibaThe objectives of this study were to optimize in vitro pollination and fluorescence microscopy procedures to characterize the gametophytic selfincompatibility of Coffea canephora genotypes. For that purpose, 115 in vitro pollinations were carried out among 30 parent plants of the Conilon (17) and Robusta (13) botanical varieties. Tester plants of compatibility groups I, II, and III were used as pollen grain donors. On the day of anthesis, pollen grains of the donor genotypes were transferred in vitro to one of the sides of the bifid stigma of each receptor flower. After 30 hours, the development of the pollen tubes was evaluated in fluorescence microscopy. Eleven genotypes (37%) were classified in compatibility Group I, thirteen (43%) in Group II, and six (20%) in Group III. In vitro pollination allowed reduction in the time necessary to diagnose compatibility, without exhibiting contamination caused by the presence of pollen grains of non-donor plants.Item Resistance of Coffea canephora as a sustainable tool for Meloidogyne incognita control(Universidade Federal de Lavras, 2022-12-29) Silva, Dvany Mamedes da; Vieira Júnior, José Roberto; Rocha, Rodrigo Barros; Espindula, Marcelo Curitiba; Rudnick, Vaneide Araújo de Sousa; Fernandes, Cléberson de Freitas; Uchôa, Francisco Paiva; Bastos, Jéssica Silva Felix; Freire, Tamiris Chaves; Sangi, Simone Carvalho; Fonseca, Aline Souza daMany factors can affect coffee production, such as the root-knot nematode, a soil pathogen that can kill plants up to two years old. In infested areas, the cultivation of resistant genotypes is an economical and ecologically appropriate alternative. The present study aims to evaluate the resistance of Coffea canephora clones to Meloidogyne incognita. Evaluations were carried out in a greenhouse at Embrapa Rondônia (Porto Velho -RO) between September 2019 and November 2020. Genotypes were inoculated with M. incognita in four experiments with six replications with a completely randomized design. Root dry weight (RDW), the number of galls (NG) and the reproduction factor (RF) were evaluated. Eighty-six coffee clones were evaluated, with 50 clones showing resistance to Meloidogyne incognita and 36 clones showing susceptibility. Clones classified as resistant had an average reproduction factor of 0.33 with a range of 0.00 to 0.95, while clones classified as susceptible had an average reproduction factor of 3.48 with an amplitude ranging from 1.02 to 14.46. The number of galls was also higher in susceptible clones than in resistant clones. Considering the ten most cultivated clones, the genotypes GJ8, GJ25, P50, SK80, AS2, P42 and LB10 were classified as resistant, and the genotypes GJ3, GJ5 and SK41 were classified as susceptible. Taken together, the results identify resistant C. canephora clones as an important and sustainable tool for controlling M. incógnita.Item New model of clonal garden for the production of robusta coffee plantlets(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-09-12) Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Diocleciano, João Maria; Rocha, Rodrigo Barros; Dias, Jairo Rafael Machado; Verdin Filho, Abraão CarlosThe objective of this work was to evaluate the production of cuttings of Coffea canephora genotypes, in a new system for training mother plants called “vertical clonal garden”. The proposed new system consists of training coffee plants with only one shoot and without bending the main shoot, so that the secondary orthotropic shoots, from which the clonal cuttings will be taken, are formed across the length of the stem in the vertical direction. The capacity for the production of cuttings of ten hybrid genotypes of coffee plants was evaluated over ten production cycles. The 'BRS 2314', 'BRS 3213', and 'BRS 3210' genotypes showed cutting production per cut of 425,000 cuttings per hectare, considered above the obtained average. The 'BRS 3193', 'BRS 2336', 'BRS 3220', and 'BRS 3137' genotypes were the least productive. Coffee plants trained in the “vertical clonal garden” system can produce about 425,000 cuttings per hectare per harvest period or about 1.275 million cuttings per hectare per year, over three harvest periods, with a greater ease in crop management and treatments.Item Expression of self-incompatibility in Coffea canephora genotypes grown in the western Amazon(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2022-12-05) Depolo, Rodrigo Prado; Rocha, Rodrigo Barros; Souza, Carolina Augusto de; Santos, Maurício Reginaldo Alves dos; Espindula, Marcelo Curitiba; Teixeira, Alexsandro LaraThe objective of this work was to characterize the expression of gametophytic self-incompatibility in a Coffea canephora breeding population, to assist in the management and development of new cultivars. For that purpose, 550 in vitro pollinations were carried out among 62 parent plants, of which 27 were from the conilon botanical variety and 35 from the robusta. Thirty-two genotypes compatible with all previously known testers were identified, suggesting the existence of new compatibility groups. From these results, hybridizations were carried out in a complete diallel design with reciprocal crosses to characterize new test plants. Based on the compatibility response with the test plants, the genotypes were clustered into the six following groups: group I, 11 (17.74%) genotypes; group II, 13 (20.97%); group III, 6 (9.68%); group IV, 9 (14.52%); group V, 8 (12.90%); and group VI, 15 (24.19%). The genotypes of the botanical variety robusta show a higher frequency of plants in compatibility group VI and a greater genetic variability, whereas those of the conilon variety have a higher frequency of plants in compatibility group II. The identification of new compatibility groups assists in new management practices that seek to increase the efficiency of pollination by favoring, through natural means, fully compatible crosses.Item Yield of robusta coffee in different spatial arrangements(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2021-12-10) Espindula, Marcelo Curitiba; Tavella, Leonardo Barreto; Schmidt, Raquel; Rocha, Rodrigo Barros; Dias, Jairo Rafael Machado; Bravin, Maísa Pinto; Partelli, Fábio LuizThe objective of this work was to determine the contribution of the number of stems to the composition of individual plant yield, and to individual and overall robusta coffee (Coffea canephora) yield at different planting densities, using a fixed number of stems per plant. The experiment was carried out in two phases. The first phase was performed from 2011 to 2015, in the municipality of Ouro Preto do Oeste, in the state of Rondônia (RO), Brazil, to evaluate different numbers of stems per plant (1, 2, 3, 4, 5, and 6). The second phase was conducted from 2013 to 2018, in the municipality of Alta Floresta D’Oeste, RO, to evaluate plant densities (at 1,666, 1,904, 2,222, 2,666, and 3,333 plants ha-1), with an initial density of four stems per plant in all treatments. The increase of number of stems per plant promotes a quadratic response to the average and cumulated yield of coffee plants, and the maximum yield is attained with four stems per plant. The number of stems should not exceed four, to avoid their tipping during years of high production. Plant density of 3,333 plants per hectare, with 4 stems per plant and 1 m spacing, promotes the reduction of individual plant yield; however, it results in higher overall crop yield.Item Environmental stratification and performance of Coffea canephora clones grown in the Western Amazon(Editora UFLA, 2021) Moraes, Marcos Santana; Rocha, Rodrigo Barros; Ferreira, Fábio Medeiros; Souza, Carolina Augusto de; Espindula, Marcelo Curitiba; Teixeira, Alexsandro LaraChange in the performance of clones grown in different environments is an important question for Coffea canephora breeding. The aim of this study was to evaluate environmental stratification and the performance of C. canephora clones grown in the Western Amazon. For that purpose, the mean yield of three crop seasons was considered to evaluate the performance of 20 genotypes grown in 6 clonal competition trials in the environments of: E1: Ouro Preto do Oeste-RO, E2: Porto Velho-RO, E3: Ariquemes-RO, E4 and E5: Rio Branco-AC and E6: Alta Floresta do Oeste-RO. The trials were conducted with a plant spacing of 3 m × 1.5 m in a complete block experimental design, with three replications of eight plants per plot. Combined analysis indicated significance of the genotype × environment (G×E) interaction and favorable conditions to obtain gains from selection. Reduction in the dimensionality estimated from climate and soil characteristics indicated that the environments of Porto Velho-RO, Rio Branco-AC and Ariquemes-RO are more similar to each other than the environments of Ouro Preto do Oeste-RO and Alta Floresta-RO of greater natural soil fertility and higher altitude. The AMMI1 biplot shows that genotypes 16, 10, and 13 had the highest mean yields, together with greater stability. In the AMMI2 scatterplot (IPCA1×IPCA2), the environ ments E4 and E5 were clustered in the same sector. Clustering based on the complex fraction of the G×E interaction coincided with the AMMI2 scatterplot that clustered the E4 and E5 environments in a single mega-environment. Except for these environments, all the others clustered as locations of different biotic and abiotic stress conditions. This result shows the importance of maintaining evaluations in these environments, which represent the conditions of the coffee fields in the region.Item Early induction of orthotropic shoots in Coffea canephora(Universidade Federal de Viçosa, 2020) Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Schmidt, Raquel; Dias, Jairo Rafael Machado; Rocha, Rodrigo BarrosIn Coffea canephora, the number of orthotropic shoots is directly related to plant yield. The objective of this study was to evaluate the vegetative and yield performance of Coffea canephora, from the botanical variety Conilon, under different management systems for early emission of orthotropic shoots. The experiment was carried out in Ouro Preto do Oeste, Rondônia, between November 2011 and May 2014. Three types of management techniques were tested for early induction of orthotropic shoots in coffee trees (T1 = bending of the orthotropic shoot; T2 = apical pruning of the orthotropic shoot, T3 = free growing). The experiment was conducted in a randomized block design with 20 replicates. Each block consisted of a clonal genotype (clone) from the Embrapa Coffee Breeding Program. The techniques pruning and apical pruning were efficient to induce early growth of orthotropic shoots in Coffea canephora, resulting in higher yield in the first commercial bean production.Item Growth and physiological quality in clonal seedlings of Robusta coffee(Universidade Federal do Ceará, 2020) Giuriatto Júnior, Jurandyr José Ton; Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Vasconcelos, Jaqueline Martins; Campanharo, MarcelaThe intrinsic characteristics of the vegetative propagule may influence the rooting speed and shoot growth, as well as the final physiological quality of clonal seedlings of Coffea canephora. The aim of this study was to evaluate the growth and physiological quality of ‘Robusta’ coffee seedlings produced from propagules (stem cuttings) with different cutting ages. The study was conducted in a greenhouse, in the district of Ouro Preto do Oeste, in Rondônia, Brazil (10˚45’43” S and 62˚15’10” W). The ages of the cuttings were 30, 60, 90, 120 and 150 days, corresponding to five positions on the secondary orthotropic stem (sprout), from the apex to the base. Dry matter accumulation, and relative and absolute growth rates were evaluated for 188 days after cutting, as well as the vegetative characteristics of the seedlings at 125 days after cutting. It appears that growth can be divided into three phases: 1) Initial: slow growth, lasting approximately 83 days; 2) Intermediate: fast growth, lasting approximately 40 days; and 3) Final: slow growth, starting approximately 125 days after cutting. With physiological quality, although all the cuttings showed similar growth curves, those of 60, 90 and 120 days produced, 125 days after cutting, the best vegetative performance in the seedlings.Item With different doses of 20-00-20 NPK formulation under rainfed conditions(Universidade Federal Rural do Semi-Árido, 2021) Torres, Josemar Dávila; Espindula, Marcelo Curitiba; Araújo, Larissa Fatarelli Bento de; Marcolan, Alaerto Luiz; Rocha, Rodrigo BarrosLittle is known about the management of high-yield clonal Coffea canephora in the Amazonian Region, mainly for nutritional aspects and cultivation system efficiency. This study aimed to evaluate the influence of different nitrogen and potassium fertilization rates on coffee grain yield and fertilizer use efficiency of C. canephora trees. An experiment was performed at an experimental field of the Embrapa Rondônia in Porto Velho (RO), Brazil. It was carried out in a split-plot scheme with six doses of 20-00-20 NPK formulation (0; 250; 500; 1,000; 2,000; and 3,000 kg ha-1) and three years of evaluation (2014, 2015, and 2016). An interaction between fertilizer dose and crop year was observed. Fertilizer doses showed an exponential behavior, with maximum yields of 51, 114, and 79 bags ha-1 at 3,000 kg ha-1 in the crop years of 2014, 2015, and 2016, respectively. Such a behavior impacted average and accumulated yields in the three harvest seasons. As for crop year effect within each fertilizer dose, the highest yield was reached in the second harvest after pruning for renewal of orthotropic stems. Moreover, fertilizer use efficiency by plants decreased exponentially, with the highest value at the lowest dose. Increasing doses of 20-00-20 formulation promoted an exponential increase in grain yield but decreased its use efficiency by C. canephora plants. This management also stimulated a strong biannual production.