Periódicos

URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3352

Navegar

Resultados da Pesquisa

Agora exibindo 1 - 10 de 233
  • Imagem de Miniatura
    Item
    IAC Herculândia - a Coffea canephora rootstock multiresistant to Meloidogyne species
    (Crop Breeding and Applied Biotechnology, 2023-08-20) Guerreiro Filho, Oliveiro; Fazuoli, Luiz Carlos; Braghini, Masako Toma; Gallo, Paulo Boller; Oliveira, Claúdio Marcelo Gonçalves; Padilha, Lilian; Fatobene, Barbhara Joana dos Reis; Andrade, Vinicius Teixeira; Vasconcelos, Larissa de Brito Caixeta; Rosa, Juliana Magrinelli Osório
    IAC Herculândia is a Coffea canephora cultivar multiresistant to Meloidogyne exigua, M. incognita, and M. paranaensis to be used as a rootstock for Coffea arabica cultivars. It is a synthetic cultivar resulting from recombination among the clonal cultivars IAC WG, IAC FEBS, IAC PM, IAC LCCBF, and IAC ARM.
  • Imagem de Miniatura
    Item
    MGS Guaiçara and MGS Vereda: Coffea arabica cultivars resistant to the root-knot nematode Meloidogyne paranaensis
    (Crop Breeding and Applied Biotechnology, 2022-09-01) Salgado, Sônia Maria de Lima; Fatobene, Bárbhara Joana dos Reis; Pereira, Antonio Alves; Abrahão, Juliana Costa de Rezende; Botelho, Cesar Elias; Carvalho, Gladyston Rodrigues; Oliveira, Antônio Carlos Baião de; Ferreira, André Dominghetti; Figueiredo, Vanessa Castro; Vilela, Diego Junior Martins; Luz, Silvana Ramlow Otto Teixeira da; Andrade, Vinicius Teixeira
    MGS Guaiçara e MGS Vereda are resistant to Meloidogyne paranaensis, one of the most aggressive nematode parasites of coffee. MGS Vereda is an early maturation cultivar, whereas MGS Guaiçara has a medium maturation cycle. Both cultivars produce red fruit, have high size, and high yield potential in infested areas.
  • Imagem de Miniatura
    Item
    Characterization and genetic diversity of Coffea canephora accessions in a germplasm bank in Espírito Santo, Brazil
    (Crop Breeding and Applied Biotechnology, 2021-06-20) Ferrão, Maria Amélia Gava; Mendonça, Rodolfo Ferreira de; Fonseca, Aymbiré Francisco Almeida; Ferrão, Romário Gava; Senra, João Felipe Brites; Volpi, Paulo Sérgio; Verdin Filho, Abraão Carlos; Comério, Marcone
    The state of Espírito Santo is the major producer of Coffea canephora in Brazil. Knowledge of genetic reserves is fundamental to plant breeding. Therefore, the present study characterized and analyzed the genetic diversity of 600 C. canephora accessions from the germplasm bank of Incaper based on 38 traits evaluated in 24-30-month-old plants. Further, the predominant descriptors or traits were identified, and high phenotypic variability was determined. Genetic distances for the grouped (Gower), quantitative, and qualitative datasets were 0.48, 0.61, and 0.92, respectively, with accessions 76 (Conilon) and 407 (Robusta) being the most divergent ones at Incaper. In clustering using the Tocher optimization method, 30 groups were formed, with three accessions introduced from Epamig’s Robusta collection being the most dissimilar ones. Graphical dispersion analysis using the principal coordinate method revealed the predominance of three groups formed by the Robusta, Conilon, and hybrid Robusta × Conilon genotypes.
  • Imagem de Miniatura
    Item
    Morpho-agronomic and leaf anatomical traits in Coffeacanephora genotypes
    (Universidade Federal de Santa Maria, 2023) Silva, Larícia Olária Emerick; Schmidt, Raquel; Almeida, Rafael Nunes de; Feitoza, Rodrigo Barbosa Braga; Cunha, Maura da; Partelli, Fábio Luiz
    Genetic variability is the basis for coffee genetic breeding. This study evaluated the potential of leaf anatomy and morpho-agronomic traits in studies of genetic variability in C. canephoracultivars. Ten genotypes were distributed in randomized block designs with three replicates. Significant differences among genotypes were detected by F-test (P < 0.05) for 13 of 15 evaluated traits. These results evidenced the heterogeneity of the studied cultivars, which is essential in composition of genetic basis in breeding programs. The Scott-Knott test detected variability among genotypes, grouped into up to four mean groups. Leaf anatomy traits presented the largest variations. Five out of seven leaf anatomy traits presented heritability higher than 80%, with emphasis on stomatal density (95.69%) and stomatal pore length (92.72%). Positive correlations were observed among morpho-agronomic and anatomic traits. Cluster analysis used the Mahalanobis general distance (D2) as a measure of genetic dissimilarity and divided the genotypes into two distinct groups. The inclusion of leaf anatomic traits to characterize C. canephoragenotypes may assist plant breeders with better genetic discrimination and with greater security in plant selection when composing cultivars.
  • Imagem de Miniatura
    Item
    Physiological quality of seeds of Coffea canephora from early and late clones during maturation
    (Instituto Agronômico (IAC), 2024-03-21) Crasque, Jeane; Brandão, Thielen Martins dos Santos; Cerri Neto, Basílio; Comério, Marcone; Volpi, Paulo Sérgio; Arantes, Lúcio de Oliveira; Machado Filho, José Altino; Milanez, Camilla Rozindo Dias; Dousseau-Arantes, Sara
    The objective of this study was to evaluate the physiological quality of seeds from early and late maturing Coffea canephora clones, aiming to identify the ideal harvest time. The fruits were collected every two weeks from 188 days after anthesis (DAA) and characterized as green, cane green, cherry, raisin and dry. The seeds were evaluated for water content, germination percentage, normal and abnormal seedlings, nongerminated seeds and dead seeds, vigor index, hypocotyl lenght, and root length. Seed germination of the early maturing clone started at 202 DAA, while that of the late maturing clone started at 230 DAA, with both clones showing a water content of 63% and a dry mass of 37%. Although the optimum harvest point was identified at the cherry ripening stage, it was found that the late maturing clone showed a more pronounced variation in the maturation process, directly impacting the physiological quality of the seeds. Furthermore, a significant correlation was observed between the maturation stages and the physiological quality of the seeds. For the early maturing clone, the maximum physiological quality was recorded at 244 DAA, corresponding to 80% of fruits at the cherry stage, while for the late maturing clone this point was reached at 326 DAA, with 98% of the fruits ripe.
  • Imagem de Miniatura
    Item
    Comparison of fructification efficiency between reciprocal crosses in Coffea canephora
    (Universidad Nacional de Colombia, 2023-10-09) Ferrão, Maria Amélia Gava; Fonseca, Aymbiré Francisco Almeida da; Ferrão, Romário Gava; Volpi, Paulo Sérgio; Verdin Filho, Abrão Carlos; Rocha, Rodrigo Barros; Riva-Souza, Elaine Manelli
    This study aimed to assess and compare the behavior of superior genotypes of Coffea canephora in terms of fruiting capacity using directed hybridizations in a full diallel design with reciprocals.Hybridizations were performed using 12 possible combinations between genotypes 02, 03, 23 and 83 from the Incaper breeding program. High estimates of the genotypic coefficient of determination in terms of the total number of pinheads per cross (TNP) and fruit set (FS) indicated variability of genetic nature. FS averaged 52,27%, ranging from 31,32% to 82,09%, with the higher rates relating to clone 23 as the male parent. Differences were found between reciprocal crosses in the combinations with genotype 23, which emerged as the donor plant with the best fruiting rate, but poor receiving ability. Clone 83 prevailed as the best receiving plant and the least effective donor. In the comparison of these two genotypes, antagonism was observed in their behavior when they were used as pollen-donor plants (male parents) and pollen-receiver plants (female parents), highlighting their possible maternal effect. Crosses involving clones 02 and 03 showed no differences when used reciprocally. The estimates of genotypic correlations were negative for the four associations involving the FS characteristic, being of greater magnitude with TNP.
  • Imagem de Miniatura
    Item
    Assessment of leaf anatomic and physiological characteristics and genetic divergence among Coffea arabica L. cultivars in the Brazilian Savanna
    (Escola de Agronomia - UFG, 2022-01-16) Santos, Cyntia Stephânia dos; Pereira, Fernanda Aparecida Castro; Mauri, Janaína; Viana, Mariana Thereza Rodrigues; Rodrigues, Gustavo Costa; Veiga, Adriano Delly; Bartholo, Gabriel Ferreira; Carvalho, Milene Alves de Figueiredo
    The knowledge on cultivars is essential for parental choosing on breeding programs. This research aimed to study the genetic divergence of Coffea arabica L. cultivars from a germoplasm bank of the Embrapa Cerrados, Brazil, for leaf anatomic and physiological characteristics. A total of 23 cultivars were evaluated: Acaiá Cerrado MG1474, Araponga MG1, Catiguá MG1, Catiguá MG2, Catiguá MG3, Catiguá MG3 P4, Catiguá MG3 P5, Catiguá MG3 P7, Catiguá MG3 P9, Catiguá MG3 P23, Catiguá MG3 P51, Catuaí Amarelo IAC 62, Catuaí Vermelho IAC 15, Catuaí Vermelho IAC 81, Catuaí Vermelho IAC 99, Caturra Vermelho MG0187, Guatenano Colis MG0207, Mundo Novo IAC 379-19, Paraíso MG1, Pau Brasil MG1, Sacramento MG1, San Ramon MG0198 and Topázio MG1190. In addition to the genetic divergence, the broad sense heritability and coefficient of genetic and environmental variation were also evaluated. All characteristics showed high coefficients of genetic variation and heritability values greater than 70 %, indicating a predominance of genetic over environmental factors, and that these are characteristics likely to obtain genetic gain. Catiguá MG1, Catiguá MG3 P51 and Topázio MG1190 stood out, with superior gas exchange characteristics. Attributes related to gas exchange were important for cultivar differentiation, demonstrating that they can be used in the early selection of Coffea arabica L. genotypes.
  • Imagem de Miniatura
    Item
    Initial vegetative development and early selection of arabica coffee cultivars in a low-altitude region
    (Instituto Agronômico (IAC), 2023-11-10) Filla, Vinícius Augusto; Coelho, Anderson Prates; Grossi Terceiro, Matheus; Morello, Orlando Ferreira; Lemos, Leandro Borges
    The cultivation of Coffea arabica L. in a low-altitude region is a sustainable alternative for diversifying the income of farmers. On account of the variability of available cultivars, the use of indirect selection through initial vegetative development may be an auxiliary tool for identifying the most suitable genotypes for this environment. This study aimed to identify the dwarf Arabica coffee cultivars with better initial development in a low-altitude region and the morphological traits with greater relevance for the early selection of cultivars with high yield potential. The experiment was installed in the northeast of São Paulo, Brazil. The experimental design used was randomized blocks with four replications. The treatments consisted of 17 dwarf Arabica coffee cultivars. There is variability among dwarf Arabica coffee cultivars for initial vegetative development. The growth and increase in the number of nodes of the plagiotropic branch can be used in early selection to identify cultivars with greater yield potential. The cultivars IAC Obatã 4739, Obatã IAC 1669-20, and Tupi IAC 1669-33 present higher initial vegetative performance in low-altitude environments. The results obtained are useful to breeders and producers for choosing the cultivars best adapted to cultivation in this environment.
  • Imagem de Miniatura
    Item
    Initial performance and genetic diversity of coffee trees cultivated under contrasting altitude conditions
    (Escola Superior de Agricultura "Luiz de Queiroz", 2023-08-14) Senra, João Felipe de Brites; Silva, Josimar Aleixo da; Ferreira, Adésio; Esposti, Marlon Dutra Degli; Ferrão, Maria Amélia Gava; Fassarella, Kamila Machado; Silva, Uliana Ribeiro; Milheiros, Idalina Sturião; Silva, Fernanda Gomes da
    This work evaluated the initial performance and genetic diversity of Coffea canephora genotypes cultivated in environments at contrasting altitudes. Fourteen morphophysiological traits and seven descriptors of the genus Coffea spp. of coffee trees cultivated at altitudes of 140 m and 700 m were evaluated. The design used was Federer’s augmented block in a 2 × 112 factorial scheme with six blocks. The first factor was the two environments, and the second was the 112 genotypes, with eight common treatments, being five conilon coffee clones and three arabica coffee cultivars. The data were analyzed by the method of REML/BLUP and genetic correlation method. Genetic diversity was evaluated by estimating the distance matrix, applying the Gower methodology followed by the clustering method by Tocher and UPGMA. The phenotypic means were higher in the environment at an altitude of 700 m, except for plant height, number of leaves, and canopy height (CH). Genotypic effects were significant for most traits except for leaf width, CH, unit leaf area, and total leaf area. A wide genetic diversity was verified, with distances varying from 0.037 to 0.593 for the pairs of genotypes 26 × 93 and T7 × 76, respectively. Most of the traits studied showed high genotypic correlation with the environment and expressive genetic correlation between the evaluated traits thereby demonstrating the possibility of indirect selection. There is an adaptation of conilon coffee genotypes to high altitudes and the possibility of developing a specific cultivar for the southern state of Espírito Santo.
  • Imagem de Miniatura
    Item
    Selection for frost resistance in Coffea arabica progenies carrying C. liberica var. dewevrei genes
    (Crop Breeding and Applied Biotechnology, 2005) Petek, Marcos Rafael; Sera, Tumoru; Alteia, Marcos Zorzenon
    This research was carried out to estimate the variability and genetic parameters for the development of cultivars more frost resistant in Coffea arabica progenies, carrying C. liberica var. dewevrei genes. There is genetic variability for frost resistance in progenies with C. liberica var. dewevrei genes. The rust resistance, vegetative vigor and yield potential should be considered when developing cultivars adapted to frost occurrence areas. Cultivars with yield precocity such as IAPAR 59, that allows a faster recovery yield after a severe frost, minimizing the damage from the phenomenon. The use of index selection is efficient to select simultaneously progenies with greater frost adaptation, vegetative vigor, rust resistance and yield.