Periódicos

URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3352

Navegar

Resultados da Pesquisa

Agora exibindo 1 - 7 de 7
  • Imagem de Miniatura
    Item
    Characterization and genetic diversity of Coffea canephora accessions in a germplasm bank in Espírito Santo, Brazil
    (Crop Breeding and Applied Biotechnology, 2021-06-20) Ferrão, Maria Amélia Gava; Mendonça, Rodolfo Ferreira de; Fonseca, Aymbiré Francisco Almeida; Ferrão, Romário Gava; Senra, João Felipe Brites; Volpi, Paulo Sérgio; Verdin Filho, Abraão Carlos; Comério, Marcone
    The state of Espírito Santo is the major producer of Coffea canephora in Brazil. Knowledge of genetic reserves is fundamental to plant breeding. Therefore, the present study characterized and analyzed the genetic diversity of 600 C. canephora accessions from the germplasm bank of Incaper based on 38 traits evaluated in 24-30-month-old plants. Further, the predominant descriptors or traits were identified, and high phenotypic variability was determined. Genetic distances for the grouped (Gower), quantitative, and qualitative datasets were 0.48, 0.61, and 0.92, respectively, with accessions 76 (Conilon) and 407 (Robusta) being the most divergent ones at Incaper. In clustering using the Tocher optimization method, 30 groups were formed, with three accessions introduced from Epamig’s Robusta collection being the most dissimilar ones. Graphical dispersion analysis using the principal coordinate method revealed the predominance of three groups formed by the Robusta, Conilon, and hybrid Robusta × Conilon genotypes.
  • Imagem de Miniatura
    Item
    Morpho-agronomic and leaf anatomical traits in Coffeacanephora genotypes
    (Universidade Federal de Santa Maria, 2023) Silva, Larícia Olária Emerick; Schmidt, Raquel; Almeida, Rafael Nunes de; Feitoza, Rodrigo Barbosa Braga; Cunha, Maura da; Partelli, Fábio Luiz
    Genetic variability is the basis for coffee genetic breeding. This study evaluated the potential of leaf anatomy and morpho-agronomic traits in studies of genetic variability in C. canephoracultivars. Ten genotypes were distributed in randomized block designs with three replicates. Significant differences among genotypes were detected by F-test (P < 0.05) for 13 of 15 evaluated traits. These results evidenced the heterogeneity of the studied cultivars, which is essential in composition of genetic basis in breeding programs. The Scott-Knott test detected variability among genotypes, grouped into up to four mean groups. Leaf anatomy traits presented the largest variations. Five out of seven leaf anatomy traits presented heritability higher than 80%, with emphasis on stomatal density (95.69%) and stomatal pore length (92.72%). Positive correlations were observed among morpho-agronomic and anatomic traits. Cluster analysis used the Mahalanobis general distance (D2) as a measure of genetic dissimilarity and divided the genotypes into two distinct groups. The inclusion of leaf anatomic traits to characterize C. canephoragenotypes may assist plant breeders with better genetic discrimination and with greater security in plant selection when composing cultivars.
  • Imagem de Miniatura
    Item
    Initial growth of Coffea canephora: Simulation of organomineral system and Limnoperna fortunei as soil improvement
    (Universidade Federal de Lavras, 2023-08-17) Barbosa, Mariana Cristina; Sena, Karla Nascimento; Maltoni, Kátia Luciene
    The use of residues can be an alternative to mineral fertilization. Manures, sources of nutrients and organic matter, are successfully used in family farming. Another residue that can be used for soil acidity amelioration is the shell of the golden mussel (Limnoperna fortunei), which is rich in CaCO3. This work evaluated the contribution of ground golden mussel shells (GMS) in combination with cattle (CTM) and sheep (SHM) manure to the initial growth of Conilon coffee in an acidic sandy soil. The experiment was carried out in protected cultivation in pots (30 kg) with two Conilon coffee cultivars. The treatments consisted of two doses of CTM (0 or 67 t ha-1) and four doses of GMS (0, 1, 2 and 3 t ha-1), with three replications. Each treatment was incorporated into the soil before the introduction of the seedlings in the experimental units, and 60 days later, a dose of SHM was applied on the soil surface (20 t ha-1). After 180 days, the soil fertility was analysed, and the seedling height, stem diameter, root volume and fresh and dry mass of the aerial parts and roots were measured. Furthermore, the Dickson Quality Index (DQI) was calculated. Both the sheep and the bovine manure increased the pH, the contents of P, MO, K+, Ca2+, and Mg2+, and the cations exchange capacity (CEC) of the soil. The addition of GMS increased the pH and the Ca2+ content while reducing the potential acidity of the soil. A pH above 6.0 reduced the levels of micronutrients in the soil. The use of CTM and SHM shows promise in the initial growth of coffee seedlings (height - H, FMAP, fresh and dry mass of the aerial parts - DMAP, FAR, fresh and dry mass of the root system – DMR diameter, RV root volume and Dickson Quality Index ). Ipiranga 501 surpassed Verdebras G35 in aerial fresh and dry mass, root volume and IQD, with or without the addition of 3 t ha-1 of ground GMS.
  • Imagem de Miniatura
    Item
    Growth promoting fungi increase the quality of Coffea canephora seedlings Pierre ex a. Froehner
    (Universidade Federal de Lavras, 2023-04-28) Alves, Jucélia Rodrigues; Celestino, Flávio Neves; Moraes, Alisson Gomes de; Reis, Ricardo Arizono dos; Grecco, Eduardo Domingos
    Growth promoting fungi have shown an important role in the development of agricultural crops. Among these fungi, the genus Trichoderma stands out, and the entomopathogenic fungi of the genus Beauveria and Metarhizium have been gaining greater importance. Thus, the aim of the present study was to evaluate the vegetative growth of conilon coffee seedlings inoculated with growth promoting fungi. For the production of seedlings, cuttings of clone A1 of conilon coffee were used, in standard substrate. The growth promoting fungi Trichoderma harzianum, Beauveria bassiana and Metarhizium anisopliae were used at a concentration of 1 x 107 conidia.mL-1, inoculated via soil and leaf. Vegetative growth evaluations were performed at 180 days after cutting. The treatments corresponded to a 4 x 2 factorial arrangement, in a randomized block design, with three replications, totaling 24 plots. The data were submitted to analysis of variance and the means compared by the Scott-Knott grouping method (p ≤ 0.05). The treatments did not promote gains in plant height, stem diameter, root length, root fresh mass, leaf area, shoot/root fresh and dry mass of conilon coffee seedlings. Growth promoting fungi T. harzianum and B. bassiana promoted a greater number of leaf pairs, greater fresh mass of aerial part and greater dry mass of aerial part. Additionally, T. harzianum promoted greater root dry mass in conilon coffee seedlings. Only for the parameter number of leaf pairs, the inoculation via soil was greater than via leaf, while for the other parameters there was no difference regarding the inoculation method.
  • Imagem de Miniatura
    Item
    Production of Coffea canephora seedlings through cuttings in a nursery and hydroponics using different containers
    (Universidade Federal de Lavras, 2023-07-19) Lima, Amador Eduardo de; Castro, Elisa de Melo; Cunha, Samuel Henrique Braga da; Guimarães, Rubens José; Chalfun, Nilton Nagib Jorge; Carvalho, Alex Mendonça de; Alves, Eduardo; Carvalho, Milene Alves Figueiredo
    The production of seedlings is a determining factor for the establishment and success of the coffee plantation. The objective of this study was to evaluate the production of Coffea canephora seedlings by cuttings in a modified hydroponic system and in a conventional nursery, using different containers. At the end of the experiment, growth (height, stem diameter, total number of pairs of leaves, leaf area, root area, dry matter weight of leaves, stem and root), physiological (chlorophyll a, b and total and stomatal conductance) and anatomical (stomatal density, functionality and opening) characteristics were analyzed. For statistical analysis, a completely randomized design (CRD) was used, with five treatments and six replications, with ten plants per plot. Seedlings produced in a modified hydroponic system using 50- and 120-cm³ tubettes show better vegetative growth and physiological characteristics compared to those produced in a nursery. Seedling management in a modified hydroponic system using 120-cm³ tubettes provides greater cutting survival percentage, number of remaining leaves and emission of shoots. In nurseries, the use of polyethylene bags provides better seedling quality and survival in relation to the use of tubettes, regardless of volume.
  • Imagem de Miniatura
    Item
    Morpho-agronomic and leaf anatomical traits in Coffeacanephora genotypes
    (Universidade Federal de Santa Maria, 2022-11-28) Silva, Larícia Olária Emerick; Schmidt, Raquel; Almeida, Rafael Nunes de; Feitoza, Rodrigo Barbosa Braga; Cunha, Maura da; Partelli, Fábio Luiz
    Genetic variability is the basis for coffee genetic breeding. This study evaluated the potential of leaf anatomy and morpho-agronomic traits in studies of genetic variability in C. canephoracultivars. Ten genotypes were distributed in randomized block designs with three replicates. Significant differences among genotypes were detected by F-test (P < 0.05) for 13 of 15 evaluated traits. These results evidenced the heterogeneity of the studied cultivars, which is essential in composition of genetic basis in breeding programs. The Scott-Knott test detected variability among genotypes, grouped into up to four mean groups. Leaf anatomy traits presented the largest variations. Five out of seven leaf anatomy traits presented heritability higher than 80%, with emphasis on stomatal density (95.69%) and stomatal pore length (92.72%). Positive correlations were observed among morpho-agronomic and anatomic traits. Cluster analysis used the Mahalanobis general distance (D2) as a measure of genetic dissimilarity and divided the genotypes into two distinct groups. The inclusion of leaf anatomic traits to characterize C. canephoragenotypes may assist plant breeders with better genetic discrimination and with greater security in plant selection when composing cultivars.
  • Imagem de Miniatura
    Item
    Characterization and genetic diversity of Coffea canephora accessions in a germplasm bank in Espírito Santo, Brazil
    (Crop Breeding and Applied Biotechnology, 2021) Ferrão, Maria Amélia Gava; Mendonça, Rodolfo Ferreira de; Fonseca, Aymbiré Francisco Almeida; Ferrão, Romário Gava; Senra, João Felipe Brites; Volpi, Paulo Sérgio; Verdin Filho, Abraão Carlos; Comério, Marcone
    The state of Espírito Santo is the major producer of Coffea canephora in Brazil. Knowledge of genetic reserves is fundamental to plant breeding. Therefore, the present study characterized and analyzed the genetic diversity of 600 C. canephora accessions from the germplasm bank of Incaper based on 38 traits evaluated in 24-30-month-old plants. Further, the predominant descriptors or traits were identified, and high phenotypic variability was determined. Genetic distances for the grouped (Gower), quantitative, and qualitative datasets were 0.48, 0.61, and 0.92, respectively, with accessions 76 (Conilon) and 407 (Robusta) being the most divergent ones at Incaper. In clustering using the Tocher optimization method, 30 groups were formed, with three accessions introduced from Epamig’s Robusta collection being the most dissimilar ones. Graphical dispersion analysis using the principal coordinate method revealed the predominance of three groups formed by the Robusta, Conilon, and hybrid Robusta × Conilon genotypes.