Periódicos
URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3352
Navegar
7 resultados
Resultados da Pesquisa
Item Improving the quality of kombucha cascara with different varieties and fermentation time in diverse arabica coffee (Coffea arabica L) cultivars(Universidade Federal de Lavras, 2023-01-12) Rohaya, Syarifah; Multahadi; Sulaiman, IsmailOne of the innovations of cascara is the kombucha cascara which is made from the fermented coffee fruit skin, which is fermented with a kombucha starter or Symbiotic Culture of Bacteria and Yeast (SCOBY). The cascara used in this study was cascara from the Timtim, Borbor, and Ateng super coffee varieties. This study aims to determine the effect of different varieties of arabica coffee and fermentation time on the quality of kombucha cascara. This study used a factorial randomized block design method consisting of two factors. The first factor is cascara from coffee varieties consisting of three levels (Timtim, Borbor, Ateng super). The second factor is the length of fermentation, consisting of three levels (4, 8, and 12 days). Parameters analyzed were antioxidant activity, total phenol, tannin content, pH, and total microbe. The results showed that cascara from coffee varieties significantly affected antioxidant activity, and pH. Fermentation time significantly affects antioxidant activity, total phenol, tannin content, pH, and total microbial. The best treatment was obtained in the cascara treatment of the Ateng super coffee variety and the fermentation time was 12 days with the following characteristics; antioxidant activity 45.74%, total phenol 132,59 mg/L, tannin content 0.46%, pH value 2.69, and total microbes 4.99x104 CFU/ml.Item Qualities of arabica and robusta cascara kombucha with different concentrations of starter(Universidade Federal de Lavras, 2022-12-29) Anjliany, Meysin; Syafutri, Merynda Indriyani; Widowati, Tri WardaniCoffee waste consisted of coffee peel (45%), mucilage (10%) and seed peel (5%). Generally, coffee peel is used in the manufacture of fertilizers. Coffee peel waste is a potential material that can be the producer of caffeine, polyphenol, bioethanol, antioxidantand antimicrobial. Coffee peel has many benefits including ward off free radicals, protect the stomach and give a firming effect on skin. This research aimed to create functional drink with high antioxidant activity by optimizing arabica and robusta coffee peel waste. This research used Completely Randomized Factorial Design with two treatment factors namely type of cascara (arabica and robusta) and starter concentration variation (5%, 10% and 15%). The treatment repeated three times. The parameters observed were total polyphenol, total titrated acid, total dissolved solid, pH and total mesophilic aerobic bacteria. The results showed that coffee peel type, starter concentration variation and the interaction between two factors had significant effects on total titrated acid and total dissolved solid cascara kombucha. Cascara kombucha with robusta coffee peel and starter concentration at 10% was chosen as the best treatment with total phenol 93.18 μg/ mL, TTA 0.82%, TDS 3.80°Brix, pH 4.21, and TMAB 7,7 log CFU/mL.Item Nutritional evaluation of silage with coffee (Coffea Arabica L.) cherry for ruminant supplementation(Universidad Nacional de Colombia, 2018) Aguirre-Fernández, Paola Andrea; Acosta-Pinto, Liria María; Cardozo-Corzo, Luz Dary; Rodríguez-Arenas, Sergio Andrés; Corredor-Sánchez, Guillermo ArturoThe aim of this study was to evaluate nutritionally coffee cherry (Coffea Arabica L.) silages with different additives: efficient microorganisms (EM) and kumis, to be used in ruminant supplementation. Micro silos were prepared according to treatments: a control treatment with coffee cherry and two experimental treatments with additives (cherry + EM and cherry + commercial kumis). Five fermentation times (1, 8, 16, 21 and 31 days) were evaluated for pH and temperature, and three fermentation times (1, 16 and 31 days) were evaluated for dry matter, protein and neutral detergent fiber; organoleptic indicator evaluation (smell, color and texture) was performed at day 31. A completely randomized design with factorial arrangement was used and linear effects, quadratic and cubic were tested over time using a regression analysis. The results did not show any statistical differences between treatments (P >.05) for pH (4.0), temperature values showed highly significant differences (P < .01), with an initial temperature of 25.3°C, which stabilized over time at 23.9°C. Dry matter did not show any differences (P >.05) among treatments, with similar content (20.6%). Regarding protein, significant differences were found (P < .05), being higher for the treatment with kumis (18.1 %) which shows that the additives addition, has a positive effect on the nutritional content. Organoleptic indicators were within the parameters estimated as acceptable for animal feeding.Item Physicochemical parameters of arabica fermented coffee in different altitudes(Editora UFLA, 2021) Pereira, Lucas Louzada; Guarçoni, Rogério Carvalho; Moreli, Aldemar Polonini; Pinheiro, Patrícia Fontes; Pinheiro, Carlos Alexandre; Moreira, Taís Rizzo; Siqueira, Evandro de Andrade; Caten, Carla Schwengber tenThe coffee quality interacts with different processes, techniques, analyses, and concepts. This study applied six different forms of wet fermentation to coffee from different altitude ranges to understand how coffee quality interacts with the physicochemical profile and its possible relations with sensory variables. Statistical analysis was performed through combined analyses of variance of the experiments, and the means were compared by the Tukey test considering the significance level of 5%. Regression models were tested by the F-test and the parameters by the t-test, followed by Pearson correlation analysis between the sensory and physicochemical characteristics and between physicochemical variables. The results indicate a correlation between sensory and physicochemical variables for total titratable acidity and indicate that these compounds are affected by the manner of fermentation applied as well as the edaphic and climatic conditions.Item Physicochemical, microbiological, and sensory characterization of fermented coffee pulp beverages(Editora UFLA, 2021) Cruz, Claudia Milena Amorocho; Cortés, Yenifer MuñozCoffee pulp is the first by-product generated from coffee processing, a contaminating residue due to its composition and production volume. So, this research presents the use of coffee pulp with honey and sugar cane juice to elaborate alcoholic beverage and infusion. The harvested coffee was washed, pulped; the pulp was distributed in 3 treatments, by duplicates, (T) coffee pulp and water, (M) coffee pulp, water and honey, (G) coffee pulp and sugar cane juice. Then, each treatment was brought to 85 °C for 15 minutes, warmed up and yeast was added to each container. Fermentation was carried out for 14 days at 15 °C. After the liquid was separated from the pulp, the liquid fraction was left to ferment another 14 days, it was clarified with bentonite, it was bottled and for 102 days mature, the degrees of alcohol was measured by simple distillation. The pulp was placed in an oven at 75 °C for 3 days, the chemical composition was analyzed by FTIR, it was packed in hermetic bags, the dry coffee pulp was used to prepare an infusion. For its use, a fermented drink and an infusion were elaborated, evaluating physicochemical, microbiological, and sensorial characteristics through three treatments. The fermented drinks presented values of alcohol degrees 7°- 6°. The treatment with honey obtained a greater acceptance followed by the treatment with sugar cane juice. The infusions were acceptable, differentiated by herbal notes, pleasant aromas, and sweet flavors. In the pulp, the following were characterized by FTIR chemical compounds and wavelengths that show their absorbencies; caffeine with ranges of 2920-2850 and 1620 cm-1, 3280 cm-1 H2O, 1740 cm-1 lipids, 1240 cm-1 chlorogenic acid, and 1015 cm-1 carbohydrates. Finally, the infusions with coffee pulp were accepted by the evaluators, especially those that went through the fermentation process with honey and sugar cane.Item Sensory Q-Grader evaluation of fermented arabica coffees by yeast (Saccharomyces cerevisiae) and lactic bacteria (Pediococcus acidilactici) cultures(Editora UFLA, 2020) Rodrigues, Sandy Dias; Coelho, Vinicius Serafim; Freitas, Valdeir Viana; Brioschi, Alessandra; Brioschi Júnior, Dério; Guarçoni, Rogério Carvalho; Pereira, Lucas Louzada; Eller, Monique Renon; Cardoso, Wilton SoaresThe objective of this study was to evaluate sensorially, by professional Q-Grader, the beverage coffee from fermentation natural and fermentation with the use of yeasts and lactic acid bacteria as starter cultures in wet coffee processing. The Arabica coffee was harvested at two different altitudes in Espírito Santo State. Both coffees went through 04 treatments: inoculated with starter cultures Saccharomyces cerevisiae (YML) or Pediococcus acidilactici CCT 1622 (LAF), natural fermentation (NF) (not inoculated) and Control, without fermentation (WF). The coffee was processed by just the wet process. After process and roasting, the sensorial analysis was performed to understand the impact of fermentation processing in the coffee quality, and was performed by 6 Q-Graders, following SCA protocol. The study evidenced that the use of natural fermentation or starter cultures during post-harvest coffee contributed to obtain a quality beverage with pleasurable sensorial characteristics, punctuated by the tasters in the overall score obtained and also by the high sensory scores in attributes such as fragrance, acidity, aftertaste and the different perceived aromas. This work demonstrates for coffee growers that fermentation technology is not intuitive but requires an understanding of the relationship of the microorganisms with the coffee and the environment. In addition to the other chemical aspects of roasting and brew coffee.Item Chemical and sensory perception of robusta coffees under wet processing(Editora UFLA, 2020) Oliveira, Emanuele Catarina da Silva; Guarçoni, Rogério Carvalho; Castro, Eustáquio Vinicius Ribeiro de; Castro, Marina Gomes de; Pereira, Lucas LouzadaThe quality of the coffee is determined by the sensorial analysis, using subjective methods and it is known that this quality is related to the chemical constituents of the grains. The present study used infrared spectroscopy to correlate the chemical composition of the grain with the final quality of the product and to assist in the current evaluation method, generating more reliability in the process. This study applied the spontaneous and induced fermentation with starter cultures (yeast) to evaluate the sensory potential from the impacts generated by the types of processes adopted. The experiments were conducted in a randomized block design with five replicates, in a 3x4 factorial scheme, with three fermentation times: 24, 48, and 72 hours and four wet processes: Washed, Yeast fermentation, Fully washed without yeast, and Fully washed with yeast. Infrared spectra were taken in the medium region (FTIR-ATR) of the 34 samples generated by the treatments. Given that the method of determining the quality of coffee is subjective, based on scores given by cuppers, the FTIR-ATR spectra were used in the construction of chemometric models to predict sensory ratings given to the attribute ‘acidity’. The mean error of prediction of the model constructed for the sensory score was 0.11. Sensory results indicated a higher score for the acidity attribute, in dry fermentation with yeast at the time of 48 hours, suggesting a new strategy for the production of quality robusta coffee.