Coffee Science
URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3355
Navegar
2 resultados
Resultados da Pesquisa
Item Evaluation of the behavior of coffee stored in cooled and natural environments(Universidade Federal de Lavras, 2023-01-11) Andrade, Ednilton Tavares de; Rezende, Renan Pereira; Borém, Flávio Meira; Rosa, Sttela Dellyzete Veiga Franco da; Rios, Paula de Almeida; Oliveira, Filipe da Silva deThe market value of coffee is strongly influenced by loss of quality, which makes storage one of the main steps in the entire production chain. The finite element method (FEM) and computational fluid dynamics (CFD) are numerical and computational techniques that facilitate the simulation of agricultural product storage systems. Computational modeling satisfactorily represents real experimentation, simplifies decision-making, and reduces costs. This study aimed to analyze mocha coffee storage for 6 months in a cooled environment with temperatures between 15 and 18 °C and in a natural environment. The water content, bulk density, specific heat, thermal conductivity, and thermal diffusivity were determined and colorimetry and sensory analysis were applied to compare initial and final samples of the product after storage. It was found that the water content and specific heat were the only properties that presented significant changes. Through sensory analysis, it was observed that the quality of the coffee was the same for both systems. A computational model was developed to simulate the heat transfer process during storage. The comparison of the simulation results with the experimental results for the temperature distribution in the grain mass showed overall mean relative errors of 2.34% for the natural environment and 5.74% for the cooled environment.Item Origin of black-green defect in the artificial drying of immature coffees(Editora UFLA, 2021) Rios, Paula de Almeida; Andrade, Ednilton Tavares de; Cardoso, Danilo BarbosaThe inequality of coffee maturation leads to a large portion of green berries in the harvest. Post-harvest management techniques seek to minimize defects during the drying process, such as black-green defects in harvested immature berries. The present study aimed to investigate the minimum occurrence of black-green defects in the drying of immature coffee berries subjected to different temperature conditions and relative humidity values. In addition to fitting mathematical models to the experimental data, the effective diffusion coefficient and the water reduction rate (WRR) were determined. Nine coffee crops (Coffea arabica L.) of the Topázio Amarelo variety were harvested manually and selectively during the green maturation stage, with an initial water content of 2.106 ± 0.05 kg.kg-1 (dry basis, d.b.). After drying, the coffee was subjected to a drying treatment in a fixed-layer dryer with combined dry bulb temperatures (Dbt) of 35, 40 and 45 °C and dew point temperatures (Dpt) of 2.6, 10.8 and 16.2 °C until a final water content of 0.124 ± 0.05 kg.kg-1 (db) was reached. After drying, black-green defects were quantified as percentages. In addition to the drying kinetics, the WRR and effective diffusivity were evaluated. The lowest percentage of black-green defects occurred at a temperature of 35 °C and a Dpt of 2.6 °C (11.00%), which is the most suitable treatment for drying natural green coffees. The highest percentage of defects occurred when a Dbt of 35 °C was combined with a Dpt of 16.2 °C (14.17%). This combination showed the lowest effective diffusion coefficient of 0.551 x 10-11 m2.s-1. The Midilli model had the best fit to the experimental data for all drying combinations. The lowest WRR was 0.063 kg.kg-1.h-1 and was observed when a Dbt of 35 °C was combined with a Dpt of 16.2 °C.