Coffee Science

URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3355

Navegar

Resultados da Pesquisa

Agora exibindo 1 - 2 de 2
  • Imagem de Miniatura
    Item
    Origin of black-green defect in the artificial drying of immature coffees
    (Editora UFLA, 2021) Rios, Paula de Almeida; Andrade, Ednilton Tavares de; Cardoso, Danilo Barbosa
    The inequality of coffee maturation leads to a large portion of green berries in the harvest. Post-harvest management techniques seek to minimize defects during the drying process, such as black-green defects in harvested immature berries. The present study aimed to investigate the minimum occurrence of black-green defects in the drying of immature coffee berries subjected to different temperature conditions and relative humidity values. In addition to fitting mathematical models to the experimental data, the effective diffusion coefficient and the water reduction rate (WRR) were determined. Nine coffee crops (Coffea arabica L.) of the Topázio Amarelo variety were harvested manually and selectively during the green maturation stage, with an initial water content of 2.106 ± 0.05 kg.kg-1 (dry basis, d.b.). After drying, the coffee was subjected to a drying treatment in a fixed-layer dryer with combined dry bulb temperatures (Dbt) of 35, 40 and 45 °C and dew point temperatures (Dpt) of 2.6, 10.8 and 16.2 °C until a final water content of 0.124 ± 0.05 kg.kg-1 (db) was reached. After drying, black-green defects were quantified as percentages. In addition to the drying kinetics, the WRR and effective diffusivity were evaluated. The lowest percentage of black-green defects occurred at a temperature of 35 °C and a Dpt of 2.6 °C (11.00%), which is the most suitable treatment for drying natural green coffees. The highest percentage of defects occurred when a Dbt of 35 °C was combined with a Dpt of 16.2 °C (14.17%). This combination showed the lowest effective diffusion coefficient of 0.551 x 10-11 m2.s-1. The Midilli model had the best fit to the experimental data for all drying combinations. The lowest WRR was 0.063 kg.kg-1.h-1 and was observed when a Dbt of 35 °C was combined with a Dpt of 16.2 °C.
  • Imagem de Miniatura
    Item
    Mathematical modeling of dehydration resistance of pericarp tissues and endosperm in fruits of arabic coffee
    (Editora UFLA, 2020) Dias, Camila de Almeida; Andrade, Ednilton Tavares de; Lemos, Isabella Àvila; Borém, Flávio Meira; Westerich, Diogo Nogueira; Silva, Ana Claudia Almeida da
    Coffee represents an important source of income for producers and for the Brazilian economy, being the second product in the country’s agricultural exports. Unlike other agricultural products, freshly harvested coffee has a high fruit water content, approximately 60% (dry base). It is fundamental to optimize the drying process for cost reduction and quality maintenance, making it necessary to understand the interdependence relation of the tissues of the pericarp and the coffee endosperm during the dehydration of the fruit. The objective of this work was to elaborate a drying model for the constituent parts of coffee fruits evaluating the resistance of each of the pericarp tissues and endosperm. The experiment was set up in a 4x6 factorial scheme (4 relative humidity of the drying air and natural, pulped natural coffee, pericarp tissues and endosperm: 1 - natural coffee and 2 – pulped natural coffee, 3 - exocarp + a portion of mesocarp, 4 - mesocarp, 5 - endocarp, 6 - endosperm]) in a completely randomized design with four replicates. The results were analyzed through analysis of variance and regression, using the statistical software STATISTICA 5.0®. The resistance to water outflow, regardless of the processing or the fruit part of the coffee, is greater when the coffee is dried with the lowest relative humidity. The natural coffee was the treatment that presented greater resistance, while the lower resistance was presented by the exocarp + a portion of mesocarp.