Coffee Science
URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3355
Navegar
3 resultados
Resultados da Pesquisa
Item Cold coffee beverages extracted by cold and hot methods: composition and sensory acceptance by youngers(Editora UFLA, 2021) Violin, João Leonardo; Acre, Lucas Bonfanti; Francisco, Julyene Silva; Mori, André Luiz Buzzo; Benassi, Marta de ToledoBrazil is the second largest coffee consumer in the world, however, the participation of the young public in this market is not very expressive. The objective of this study was to evaluate the impact of non-sensory (packaging color, information, and images) and brewing methods (hot or cold extraction) on the acceptance of cold coffee beverages by young consumers. A coffee:water ratio of 1:10 (w:v) and infusion during 4 min and 24 h was used for both hot and cold extractions, respectively. Hot extraction was performed at 95 °C, then cooled in a refrigerator and served at 6 to 10 °C, the same temperature that the cold extraction was performed and served. The beverages were characterized by composition and extraction yield. The packaging of the beverages was designed aiming to appeal to the young Brazilian public (15 to 24 years old), and it was used for the Expectation Evaluation. The type of extraction (hot or cold) produced beverages with differences in composition but with similar acceptance. Except for pH (average value of 5.1), the beverages differed in all the studied parameters. Hot-extracted beverages (iced coffees) had higher contents of caffeine, chlorogenic acids, and melanoidins (92.9, 258.2, and 360.8∙10-6 kg 100 mL-1, respectively); they also presented higher acidity (3.4 mL of NaOH 20 mL-1) as well as higher yield compared to the cold-extracted beverages (cold brews). The use on product labels of brown and black colors, coffee bean images, and the inclusion of information regarding the bever ages (extraction method, consumption temperature, non-addition of sugar) generated a positive expectation that was assimilated by the young public. In conclusion, both proposals of cold coffee beverages (by hot or cold extraction) were well accepted considering their sensory and non-sensory aspects.Item Physicochemical, microbiological, and sensory characterization of fermented coffee pulp beverages(Editora UFLA, 2021) Cruz, Claudia Milena Amorocho; Cortés, Yenifer MuñozCoffee pulp is the first by-product generated from coffee processing, a contaminating residue due to its composition and production volume. So, this research presents the use of coffee pulp with honey and sugar cane juice to elaborate alcoholic beverage and infusion. The harvested coffee was washed, pulped; the pulp was distributed in 3 treatments, by duplicates, (T) coffee pulp and water, (M) coffee pulp, water and honey, (G) coffee pulp and sugar cane juice. Then, each treatment was brought to 85 °C for 15 minutes, warmed up and yeast was added to each container. Fermentation was carried out for 14 days at 15 °C. After the liquid was separated from the pulp, the liquid fraction was left to ferment another 14 days, it was clarified with bentonite, it was bottled and for 102 days mature, the degrees of alcohol was measured by simple distillation. The pulp was placed in an oven at 75 °C for 3 days, the chemical composition was analyzed by FTIR, it was packed in hermetic bags, the dry coffee pulp was used to prepare an infusion. For its use, a fermented drink and an infusion were elaborated, evaluating physicochemical, microbiological, and sensorial characteristics through three treatments. The fermented drinks presented values of alcohol degrees 7°- 6°. The treatment with honey obtained a greater acceptance followed by the treatment with sugar cane juice. The infusions were acceptable, differentiated by herbal notes, pleasant aromas, and sweet flavors. In the pulp, the following were characterized by FTIR chemical compounds and wavelengths that show their absorbencies; caffeine with ranges of 2920-2850 and 1620 cm-1, 3280 cm-1 H2O, 1740 cm-1 lipids, 1240 cm-1 chlorogenic acid, and 1015 cm-1 carbohydrates. Finally, the infusions with coffee pulp were accepted by the evaluators, especially those that went through the fermentation process with honey and sugar cane.Item Optimization of robusta green coffee fermentation using response surface methodology(Editora UFLA, 2020) Narko, Tedjo; Wibowo, Marlia Singgih; Damayanti, Sophi; Wibowo, Indra; Hadiyat, Mochammad ArbiKombucha coffee is a fermented coffee bean, which is extracted using a combination of bacteria and yeast. Kombucha coffee can be obtained by optimizing the three variables, namely sugar concentration, incubation temperature and duration of fermentation using a response surface methodology (RSM). This study aimed to produce kombucha coffee with a low concentration of caffeine and a high concentration of chlorogenic acid by optimizing three influential variables in the fermentation. The analysis of caffeine and chlorogenic acid contained in the kombucha coffee was carried out by using High Performance Liquid Chromatography (HPLC) and then the analysis of optimization was carried out by using Response Surface Methodology (RSM). The results of RSM show that the optimum condition was obtained at sugar concentration of 6.77% (b/v), incubation temperature of 25 °C and incubation for 18 days. The results were similar to HPLC analysis. Finally, the fermentation using RSM on kombucha coffee required an additional variable which is the amount of kombucha culture inoculums, as well as the variables of sugar concentration, incubation temperature, and duration of fermentation.