Ciência Rural
URI permanente para esta coleção${dspace.url}/handle/123456789/10366
Navegar
77 resultados
Resultados da Pesquisa
Item Trends and findings in the rooting of conilon coffee: a bibliometric review(Universidade Federal de Santa Maria, 2025) Sallin, Valéria Pancieri; Lira, Jean Marcel Sousa; Falqueto, Antelmo Ralph; Arantes, Lúcio de Oliveira; Dousseau-Arantes, SaraThe structure of the root system of the conilon coffee tree has improved over the years through propagation, genetic, and agronomic studies in response to demands for improvements in plant development, production, and survival of the species. Scientific research plays an important role in generating technologies and the security of applications. However, there is a need to refine the content generated to analyze discoveries and trends on the subject. Therefore, the present study conduct a bibliometric review and analysis on the main contributions of relevant studies, researchers, organizations, and countries in academic research on the rooting of Coffea canephora in the Web of Science (WOS) database. Data from the WOS database published between 1982 and 2021 and systematized in the VOSviewer software showed a set of 92 articles, the majority of which originated in Brazil and France, with the main groups being the Brazilian Agricultural Research Corporation, the Federal University of Viçosa, and CIRAD. The study was divided into five areas: genetic diversity, asexual propagation, nematology, tolerance to water stress, and micropropagation. However, in the context of climate changes and its impact on the production and longevity of Brazilian coffee farming, research focused on the root system has increased significantly, integrating it into lines that explore and integrate topics such as climate risk, water management, drought tolerance, and drip irrigation, including reflections on the performance of coffee agronomy.Item Unraveling the genetic diversity of coffee processing traits in Coffea canephora(Universidade Federal de Santa Maria, 2024-08-26) Silva, Adriele Nunes Rodrigues; Rocha, Rodrigo Barros; Moraes, Amanda de Oliveira; Espindula, Marcelo Curitiba; Teixeira, Alexsandro Lara; Alves, Enrique AnastácioWith advancements in coffee cultivation, several traits may be considered in selection of plants, which must exhibit a set of favorable characteristics. The outturn index, defined as the relationship between the mass of mature fruit and processed beans, emerges as a key factor influencing productivity. This study characterized the outturn over two harvests of 57 clones marketed in the public domain and 10 registered cultivars. The analysis considers the effects of genotypes, measurements, and genetic progress achieved through plant selection. According to the maturation cycle of each clone, washed samples of cherry coffee were collected considering a completely randomized factorial design for characterization of the effects of genotypes, years, and the genotype × years (GY) interaction. The drying, peeling, and the outturn index were individually assessed. Despite the significant effects of the GY interaction, genotypes demonstrated minimal alterations in their ranking across measurements. Clones with higher outturn, including LB30, BRS1216, LB12, N7, LB10, LB20, BRS3220, and AS5, exhibited an average outturn of 25.51%, reflecting a gain of 12.17%. Conversely, clones with lower outturn, such as BG180, GJ30, GJ20, AS7, AS10, P42, N1, and P60, had an average of 19.15%, indicating a reduction of 14.02% compared to the general mean. Analyzing the distribution of the outturn values, 19.4%, 62.7%, and 17.9% of genotypes were classified as high, medium, and low outturn, respectively, providing valuable insights for optimal cultivation strategies.Item Economic profitability in conventional and irrigated coffee production systems in three municipalities in the Marilia region of São Paulo, Brazil(Universidade Federal de Santa Maria, 2017) Turco, Patrícia Helena Nogueira; Esperancini, Maura Seiko Tsutsui; Bueno, Osmar de Carvalho; Oliveira, Marli Dias MascarenhasThe objective of this study was to evaluate the economic benefit of coffee cultivation, with a focus on the distinction between conventional and irrigated coffee production systems. For the development of the study, the various productive systems were delineated from the data provided by a sample of producers to generate a matrix of average technical coefficients. The methodology used to estimate the operating cost of production is the one used by the Instituto de Economia Agrícola (IEA). Profitability indicators were also evaluated. Results indicated that the effective operational cost (EOC) incurred in the irrigated production system is higher than that in the conventional system. As regards the cost composition, in the conventional coffee production system, the largest cost incurred is on fertilizers among all inputs, whereas in the irrigated production system, the largest cost incurred is on machinery and equipment that are mainly used in harvesting, for the period 2013-2015. Profitability index of the conventional coffee production system in 2015 was 44.8%, and that of the drip irrigated production system was 49.7%. In 2014, profitability rates were negative for both the conventional (-13.9%) and irrigated coffee production systems (-8.6%). The most preferable choice was found to be the irrigated production system, as it allows reducing the risk of loss in production during prolonged periods of water shortage as well as greater yields due to a larger production of grains.Item Octave band sound pressure level emitted by agricultural implements in coffee plantations(Universidade Federal de Santa Maria, 2024-02-23) Anderson, Carlos Guida; Sabino, Paulo Henrique de Siqueira; Oliveira Júnior, Geraldo Gomes de; Silva, Gian Otávio Alves daIn Brazil, certain studies have been performed on the exposure to global occupational noise levels when mechanized equipment is used in coffee-growing. However, these did not indicate the behavior within a frequency spectrum (Hz) by octave bands. The objective of this study was to assess the sound pressure levels of the brush, mower, and atomizer attached to a tractor under actual operating conditions by using 1/1 octave band filters. Quantitative assessments were performed with the mower, brush, and atomizer attached to the MF 275 tractor under two conditions: operative and static. The noise levels obtained under actual operating conditions were determined using a DOS 1000 noise dosimeter and an octave band filter. The static condition assessments were performed inside and outside the coffee plantation using a Hikari HDB 900 digital sound level meter. The NR 15 and NHO 01 standards were used to analyze the data. Under operative and static conditions, the tractor units showed noise levels above the exposure limit of 85 dB (A) for an 8h working day. The assessment of the frequency spectrum revealed the highest noise levels to be in the 125-1000 Hz range.Item Morpho-agronomic and leaf anatomical traits in Coffeacanephora genotypes(Universidade Federal de Santa Maria, 2023) Silva, Larícia Olária Emerick; Schmidt, Raquel; Almeida, Rafael Nunes de; Feitoza, Rodrigo Barbosa Braga; Cunha, Maura da; Partelli, Fábio LuizGenetic variability is the basis for coffee genetic breeding. This study evaluated the potential of leaf anatomy and morpho-agronomic traits in studies of genetic variability in C. canephoracultivars. Ten genotypes were distributed in randomized block designs with three replicates. Significant differences among genotypes were detected by F-test (P < 0.05) for 13 of 15 evaluated traits. These results evidenced the heterogeneity of the studied cultivars, which is essential in composition of genetic basis in breeding programs. The Scott-Knott test detected variability among genotypes, grouped into up to four mean groups. Leaf anatomy traits presented the largest variations. Five out of seven leaf anatomy traits presented heritability higher than 80%, with emphasis on stomatal density (95.69%) and stomatal pore length (92.72%). Positive correlations were observed among morpho-agronomic and anatomic traits. Cluster analysis used the Mahalanobis general distance (D2) as a measure of genetic dissimilarity and divided the genotypes into two distinct groups. The inclusion of leaf anatomic traits to characterize C. canephoragenotypes may assist plant breeders with better genetic discrimination and with greater security in plant selection when composing cultivars.Item Nutritional value and fermentative characteristics of pearl millet silage with different levels of coffee husk(Universidade Federal de Santa Maria, 2023-07-17) Souza, Leir de Oliveira; Neiva Júnior, Arnaldo Prata; Tavares, Valdir Botega; Gurgel, Antonio Leandro Chaves; Teixeira, Rafael Monteiro Araújo; Lara, Erika Christina; Fernandes, Patrick Bezerra; Ítavo, Luís Carlos VinhasThe research was conducted to test the hypothesis that the inclusion of coffee husk (Coffea sp.) would improve the fermentative characteristics and quality of pearl millet silage (Pennisetumglaucum). Thus, the objective was to assess the effect of the inclusion of different levels of coffee husk in pearl millet silage on the chemical composition, fermentative characteristics and degradability in situ of silage. The experimental design used was completely randomized and the treatments consisted of the silage of the whole pearl millet plant with the inclusion of increasing levels of coffee husk: 0%, 7%, 14% and 21%, based on natural matter. After 60 days of fermentation, the silages were evaluated for chemical characteristics, fermentative, degradability in situ dry matter (DM) and neutral detergent fiber (NDF). The inclusion of coffee husk did not alter (P > 0.05) the contents of crude protein (11.94%), NDF (44.89%) and total digestible nutrients (65.09%). There were increases in the concentrations of DM and fiber in acid detergent, accompanied by a reduction in the concentrations of mineral matter and ether extract, as the proportion of coffee husks in silages increased. There was an increase in the lignin content up to the level of 7.59% inclusion of the coffee husk. There was no effect of the inclusion of the coffee husk on the pH of the silage (3.60). However, the inclusion of coffee husk resulted in a reduction in temperature, gas losses, and degradability in situ of silage DM and NDF. It is recommended to include coffee husk up to the level of 14.0% of the natural matter to improve the fermentation pattern and the quality of the pearl millet silage.Item Steps of cryopreservation of coffee seeds: physiological responses and antioxidant systems(Universidade Federal de Santa Maria, 2023-08-21) Souza, Ana Cristina de; Costa, Marina Chagas; Figueiredo, Madeleine Alves de; Pereira, Cristiane Carvalho; Coelho, Stefânia Vilas Boas; Vilela, Ana Luiza Oliveira; Pereira, Diego de Souza; Rosa, Sttela Dellyzete Veiga Franco daThe cryopreservation of plant germplasm at ultralow temperatures is an alternative technique for the long-term storage of seeds of the genus Coffea sp. However, for this technique to be successful, cell integrity must be maintained at all stages of the process on the basis of scientific research. The present study investigated validated cryopreservation protocols for Coffea arabica L. seeds and evaluate the effects on the physiological and biochemical characteristics of the seeds at each stage of the process. Seeds were dried on silica gel or with saturated saline solution, precooled or not in a biofreezer, immersed in nitrogen, and reheated in a water bath. After each of these steps, the physiological and biochemical quality of the seeds was determined. Pre-cooling is a step that can be dispensed with in the cryopreservation of Coffea arabica seeds, direct immersion in liquid nitrogen being more indicated. Coffea arabica L. seeds tolerate cryopreservation after rapid drying in silica gel up to water contents of 17 or 20% (wb), with greater survival at 17%. The enzyme activities of catalase, polyphenol oxidase and peroxidase are indicators of the quality of C. arabica L. seeds subjected to cryopreservation.Item Morpho-agronomic and leaf anatomical traits in Coffeacanephora genotypes(Universidade Federal de Santa Maria, 2022-11-28) Silva, Larícia Olária Emerick; Schmidt, Raquel; Almeida, Rafael Nunes de; Feitoza, Rodrigo Barbosa Braga; Cunha, Maura da; Partelli, Fábio LuizGenetic variability is the basis for coffee genetic breeding. This study evaluated the potential of leaf anatomy and morpho-agronomic traits in studies of genetic variability in C. canephoracultivars. Ten genotypes were distributed in randomized block designs with three replicates. Significant differences among genotypes were detected by F-test (P < 0.05) for 13 of 15 evaluated traits. These results evidenced the heterogeneity of the studied cultivars, which is essential in composition of genetic basis in breeding programs. The Scott-Knott test detected variability among genotypes, grouped into up to four mean groups. Leaf anatomy traits presented the largest variations. Five out of seven leaf anatomy traits presented heritability higher than 80%, with emphasis on stomatal density (95.69%) and stomatal pore length (92.72%). Positive correlations were observed among morpho-agronomic and anatomic traits. Cluster analysis used the Mahalanobis general distance (D2) as a measure of genetic dissimilarity and divided the genotypes into two distinct groups. The inclusion of leaf anatomic traits to characterize C. canephoragenotypes may assist plant breeders with better genetic discrimination and with greater security in plant selection when composing cultivars.Item Different nitrogen levels on vegetative growth and yield of conilon coffee (Coffea canephora)(Universidade Federal de Santa Maria, 2022-05-11) Busato, Camilo; Reis, Edvaldo Fialho dos; Oliveira, Marcos Góes; Garcia, Giovanni de Oliveira; Busato, Cristiani Campos Martins; Partelli, Fábio LuizThe determination of nitrogen in plants by techniques that allow a fast diagnosis, based on plant growth characteristics, can be a useful tool for the nutritional management of coffee plants. Thus, this study evaluated growth and yield characteristics of irrigated conilon coffee in response to different nitrogen levels, resulting in the determination of the minimum N levels required to achieve the maximum yield, here called critical levels. The experiment was carried out in Colatina, Espirito Santo, Brazil, on plantations of conilon coffee, clonal variety Emcapa 8111, genotype 02. Six nitrogen levels were applied (0, 110, 220, 440, 880 and 1320 kg N ha-1) and the response in growth and yield characteristics periodically evaluated. There was a positive effect of the increasing N levels on yield, in that the N levels that provided 95% of the maximum yield (137.4 bags ha-1 and 108.5 bags ha-1) in the 2012/2013 and 2013/2014 growing seasons, respectively, were 420.7 and 543.1 kg N ha-1. There was also a positive effect of N levels on the growth characteristics and nitrogen contents, indicating their use as tools for a rapid nutritional diagnosis, with a view to optimizing the nitrogen management in Conilon coffee.Item Occupational noise level emitted by self-propelled harvesters during mechanized coffee harvesting(Universidade Federal de Santa Maria, 2022-08-29) Martins, Kleber Moreira; Sabino, Paulo Henrique de Siqueira; Silva, Adriano Bortolotti da; Oliveira Júnior, Geraldo Gomes de; Ramirio, Lucas DeleonThis study evaluated the level of occupational noise emitted by automotive harvesters during coffee harvest. For the evaluations, three self-propelled harvesters were used: Case-IH® model Coffee Express 200, with cabin; Korvan® model 9200, without cabin; and Oxbo® model 9220, with cabin. Data were collected using a noise dosimeter model DOS-700. Noise levels were assessed for the operator and assistant of each harvester. Five repetitions were performed for the operator and assistant, with each repetition consisting of 2 h of evaluation. Results obtained were compared with the action level and exposure limit of the Regulatory Norms (NR) 15 and Occupational Hygiene Norms (NHO) 01. The action levels of the NHO 01 (82 dB) and NR 15 (80 dB) regulations were exceeded for the operator and assistant in the three evaluated harvesters. Regarding the exposure limit (85 dB), the level was exceeded for the operator of the Korvan® and Case-IH® harvesters in accordance with NHO 01. In the NR 15 regulation, the exposure limit was > 85 dB for the operator of the Korvan® harvester. For the assistant, all harvesters emitted noise levels > 85 dB based on both the NHO 01 and NR 15 regulations.