Periódicos
URI permanente desta comunidadehttps://thoth.dti.ufv.br/handle/123456789/3352
Navegar
33 resultados
Resultados da Pesquisa
Item Morpho-agronomic and leaf anatomical traits in Coffeacanephora genotypes(Universidade Federal de Santa Maria, 2023) Silva, Larícia Olária Emerick; Schmidt, Raquel; Almeida, Rafael Nunes de; Feitoza, Rodrigo Barbosa Braga; Cunha, Maura da; Partelli, Fábio LuizGenetic variability is the basis for coffee genetic breeding. This study evaluated the potential of leaf anatomy and morpho-agronomic traits in studies of genetic variability in C. canephoracultivars. Ten genotypes were distributed in randomized block designs with three replicates. Significant differences among genotypes were detected by F-test (P < 0.05) for 13 of 15 evaluated traits. These results evidenced the heterogeneity of the studied cultivars, which is essential in composition of genetic basis in breeding programs. The Scott-Knott test detected variability among genotypes, grouped into up to four mean groups. Leaf anatomy traits presented the largest variations. Five out of seven leaf anatomy traits presented heritability higher than 80%, with emphasis on stomatal density (95.69%) and stomatal pore length (92.72%). Positive correlations were observed among morpho-agronomic and anatomic traits. Cluster analysis used the Mahalanobis general distance (D2) as a measure of genetic dissimilarity and divided the genotypes into two distinct groups. The inclusion of leaf anatomic traits to characterize C. canephoragenotypes may assist plant breeders with better genetic discrimination and with greater security in plant selection when composing cultivars.Item Effect of indole-3-acetic acid on growth, physiology and nutritional status of young arabica coffee plants(Universidade Federal de Lavras, 2023-01-20) Erlacher, Wellington Abeldt; Amaral, José Francisco Teixeira do; Amaral, José Augusto Teixeira do; Christo, Bruno Fardim; Ferreira, Daniel Soares; Tatagiba, Sandro Dan; Rocha, Brunno Cesar Pereira; Tomaz, Marcelo Antonio; Rodrigues, Wagner Nunes; Partelli, Fábio LuizCoffee is one of the main agricultural commodities in the world. Thus, research aimed at reducing the productive risks of the crop has been increasingly encouraged, among which the use of plant hormones stands out. In addition, the objective of this work was to analyze the effect of the application of indole-3-acetic acid on the growth, nutrition and gas exchange of young Coffea arabica L plants. The experiment was carried out in the field in the city of Alegre, Espírito Santo, Brazil. The experimental design used was randomized blocks, testing the effect of the application of five doses of indole-3-acetic acid in young Arabica coffee plants, in four replications. The application of indole-3-acetic acid stimulates the growth rate of the stem diameter at a concentration of 60 mg L-1, as well as gas exchange in coffee plants, however it did not favor the increase in the substomatic concentration of CO2 instantaneous and intrinsic efficiency in water use and instantaneous carboxylation efficiency. Although the application of EIA was not able to provide direct gains in coffee growth during the experimental period, a longer evaluation of the treatments would possibly provide promising results for the coffee crop. The multivariate analysis showed that higher doses of auxin have a high relationship with the macronutrients studied.Item Morpho-agronomic and leaf anatomical traits in Coffeacanephora genotypes(Universidade Federal de Santa Maria, 2022-11-28) Silva, Larícia Olária Emerick; Schmidt, Raquel; Almeida, Rafael Nunes de; Feitoza, Rodrigo Barbosa Braga; Cunha, Maura da; Partelli, Fábio LuizGenetic variability is the basis for coffee genetic breeding. This study evaluated the potential of leaf anatomy and morpho-agronomic traits in studies of genetic variability in C. canephoracultivars. Ten genotypes were distributed in randomized block designs with three replicates. Significant differences among genotypes were detected by F-test (P < 0.05) for 13 of 15 evaluated traits. These results evidenced the heterogeneity of the studied cultivars, which is essential in composition of genetic basis in breeding programs. The Scott-Knott test detected variability among genotypes, grouped into up to four mean groups. Leaf anatomy traits presented the largest variations. Five out of seven leaf anatomy traits presented heritability higher than 80%, with emphasis on stomatal density (95.69%) and stomatal pore length (92.72%). Positive correlations were observed among morpho-agronomic and anatomic traits. Cluster analysis used the Mahalanobis general distance (D2) as a measure of genetic dissimilarity and divided the genotypes into two distinct groups. The inclusion of leaf anatomic traits to characterize C. canephoragenotypes may assist plant breeders with better genetic discrimination and with greater security in plant selection when composing cultivars.Item Yield of robusta coffee in different spatial arrangements(Empresa Brasileira de Pesquisa Agropecuária - Embrapa, 2021-12-10) Espindula, Marcelo Curitiba; Tavella, Leonardo Barreto; Schmidt, Raquel; Rocha, Rodrigo Barros; Dias, Jairo Rafael Machado; Bravin, Maísa Pinto; Partelli, Fábio LuizThe objective of this work was to determine the contribution of the number of stems to the composition of individual plant yield, and to individual and overall robusta coffee (Coffea canephora) yield at different planting densities, using a fixed number of stems per plant. The experiment was carried out in two phases. The first phase was performed from 2011 to 2015, in the municipality of Ouro Preto do Oeste, in the state of Rondônia (RO), Brazil, to evaluate different numbers of stems per plant (1, 2, 3, 4, 5, and 6). The second phase was conducted from 2013 to 2018, in the municipality of Alta Floresta D’Oeste, RO, to evaluate plant densities (at 1,666, 1,904, 2,222, 2,666, and 3,333 plants ha-1), with an initial density of four stems per plant in all treatments. The increase of number of stems per plant promotes a quadratic response to the average and cumulated yield of coffee plants, and the maximum yield is attained with four stems per plant. The number of stems should not exceed four, to avoid their tipping during years of high production. Plant density of 3,333 plants per hectare, with 4 stems per plant and 1 m spacing, promotes the reduction of individual plant yield; however, it results in higher overall crop yield.Item Different nitrogen levels on vegetative growth and yield of conilon coffee (Coffea canephora)(Universidade Federal de Santa Maria, 2022-05-11) Busato, Camilo; Reis, Edvaldo Fialho dos; Oliveira, Marcos Góes; Garcia, Giovanni de Oliveira; Busato, Cristiani Campos Martins; Partelli, Fábio LuizThe determination of nitrogen in plants by techniques that allow a fast diagnosis, based on plant growth characteristics, can be a useful tool for the nutritional management of coffee plants. Thus, this study evaluated growth and yield characteristics of irrigated conilon coffee in response to different nitrogen levels, resulting in the determination of the minimum N levels required to achieve the maximum yield, here called critical levels. The experiment was carried out in Colatina, Espirito Santo, Brazil, on plantations of conilon coffee, clonal variety Emcapa 8111, genotype 02. Six nitrogen levels were applied (0, 110, 220, 440, 880 and 1320 kg N ha-1) and the response in growth and yield characteristics periodically evaluated. There was a positive effect of the increasing N levels on yield, in that the N levels that provided 95% of the maximum yield (137.4 bags ha-1 and 108.5 bags ha-1) in the 2012/2013 and 2013/2014 growing seasons, respectively, were 420.7 and 543.1 kg N ha-1. There was also a positive effect of N levels on the growth characteristics and nitrogen contents, indicating their use as tools for a rapid nutritional diagnosis, with a view to optimizing the nitrogen management in Conilon coffee.Item A moderna cafeicultura dos cerrados brasileiros(Escola de Agronomia - UFG, 2012) Fernandes, André Luís Teixeira; Partelli, Fábio Luiz; Bonomo, Robson; Golynski, AdelmoA cafeicultura brasileira apresenta grande importância na geração de empregos, recursos e divisas, sendo bastante diversificada, com particularidades regionais. O Cerrado brasileiro abrange mais de 200 milhões de hectares, distribuídos nos Estados de Minas Gerais, Goiás, Mato Grosso, Mato Grosso do Sul, Tocantins, Bahia, Piauí, Maranhão e Distrito Federal, e tem se destacado com produção superior a 5 milhões de sacas por ano, principalmente de Coffea arabica L. A cafeicultura, nesta região, é caracterizada por apresentar produtividade acima da média nacional e utilizar, de maneira mais eficiente, insumos agrícolas, irrigação, genótipos apropriados e mecanização, dentre outras práticas. A cafeicultura irrigada ocupa, no Brasil, 240.000 ha, estando a maioria desta área localizada em regiões de Cerrado, representando mais de 10% da área e mais de 25% da produção de café total no País. Os sistemas de irrigação mais utilizados são os de aspersão (convencional, em malha e pivô central) e os localizados (gotejamento e modificados). O clima é favorável à qualidade do café, pois, na época da colheita, ocorrem condições de baixa umidade relativa do ar, sendo as chuvas concentradas no verão. Verifica-se, também, nas áreas de Cerrado, maior quantidade de insolação, principalmente nos meses de outono e inverno, também favorável à produtividade e qualidade. As variedades mais plantadas são do grupo Catuaí e Mundo Novo, tendo sido, também, introduzidos outros materiais promissores, com relação à produtividade e resistência à seca e a doenças.Item Tributun: a coffee cultivar developed in partnership with farmers(Crop Breeding and Applied Biotechnology, 2020) Partelli, Fábio Luiz; Giles, João Antonio Dutra; Oliosi, Gleison; Covre, André Monzoli; Ferreira, Adésio; Rodrigues, Valcir MeneguelliTributun is a cultivar of Coffea canephora derived from breeding clones discovered by farmers. It was evaluated at 150 m asl in northern Espírito Santo for yield, plant vigor and pest and disease resistance. The cultivar with six genotypes produces a mean yield of 90.87 bags ha-1 year-1.Item Andina - first clonal cultivar of high-altitude conilon coffee(Crop Breeding and Applied Biotechnology, 2019) Partelli, Fábio Luiz; Golynski, Adelmo; Ferreira, Adésio; Martins, Madlles Queiroz; Mauri, Aldo Luiz; Ramalho, José Cochicho; Vieira, Henrique DuarteAndina is a conilon coffee variety originated from a selection of clones discovered by farmers. It was cultivated and evaluated for yield and plant vigor an altitude of 850m asl. Five genotypes (A1, NV2, NV8, P1 and Verdim TA), with a mean yield of 51.3 bags per hectare per year.Item Microclimatic characterization of conilon coffee cultivate dinnorth-south alignment in northen Espírito Santo state, Brazil(Editora UFLA, 2019-10) Bis, Ana Paula Pereira; Partelli, Fábio Luiz; Rodrigues, Weverton Pereira; Falqueto, Antelmo Ralph; Espindula, Marcelo Curitiba; Martins, Lima DeleonThe objective in this work was to study the influence of the North-South plantation alignment with respect to microclimatic, growth, and mineral nutrition conditions in order to quantify the variables and to point out possible consequences for the coffee tree. The experiment was carried out in a 6-year-old conilon coffee (Coffea canephora) crop with a mean height of 1.6 m, cultivated in full sun and spaced 3.5 m x 1.0 m. The data were collected on four dates from December 2016 to September 2017 in North Espírito Santo State, Brazil. The irradiance, air temperature, and vapor pressure deficit variables were quantified by means of external data loggers. The leaf temperature was determined by means of thermal images, and the plant growth and nutrient concentration in the leaves on both sides of the plant (East and West) were evaluated. The West side of the plant showed higher values of irradiance, temperature, and vapor pressure deficit in the afternoon, reaching a difference of 5°C between the two sides. The leaf temperature had similar behavior to air temperature, reaching a difference of approximately 12°C between the two sides in the afternoon. Although significant differences were observed for some nutrients between the sides of the plant, macro and micronutrient leaf contents remained within the range considered adequate for the coffee tree.Item Comparison between grafting and cutting as vegetative propagation methods for conilon coffee plants(Editora da Universidade Estadual de Maringá - EDUEM, 2013-10) Andrade Júnior, Saul de; Alexandre, Rodrigo Sobreira; Schmildt, Edilson Romais; Partelli, Fábio Luiz; Ferrão, Maria Amélia Gava; Mauri, Aldo LuizThe purpose of this study was to assess the growth of conilon coffee tree plantlets that were propagated by grafting and cutting. The experiment was conducted at the plantlet production site of Incaper’s Experimental Farm in the city of Marilândia, Espírito Santo State. For grafting, plantlets derived from the seed propagation of Coffea canephora cv. Robusta Tropical (ENCAPER 8151) were used as rootstocks, and six clones of cv. Conilon Vitória (INCAPER 8142) were used as the grafts. The cutting was performed with six clones that were used for grafting. The experimental design consisted of randomized blocks of twelve treatments with five repetitions composed of twelve plantlets. On the hundred and fifth day, the averages of the variables were assessed and compared by the Scheffé test at a probability of 5%. The grafted plantlets were superior for almost all of the characteristics assessed, which suggests that it is possible to propagate conilon coffee trees.